The Recreator3D PET1 Spooler Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Recreator3D PET1 Spooler Connector, uses 2x - M3x4 (or taller) screws. Reduces a rough start to your pull.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Recreator3D PET1 Spooler Connector,
uses 2x - M3x4 (or taller) screws.
Reduces a rough start to your pull.
- Connect one side to a draw string (we used some PET1 Filament)
and connect it to the spooler. You'll want to use two of the pilot holes on the spooler core.
- Pull a starter piece of your bottle strip forward through the nozzle, just long to connect to it.
- Connect the second side with the screw, tight and secure.
- Start the Pultrusion command and the connector does it's job.
Check out the Demo Video here:
- Learn more about Recreator3D Pultrusion @ https://recreator3d.com/
- BUY a KB-3D MK6 Fun Size Parts Kit Here : https://kb-3d.com/store/243-recreator3d