The Recreator3D PET1 Spooler Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Recreator3D PET1 Spooler Connector, uses 2x - M3x4 (or taller) screws. Reduces a rough start to your pull.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Recreator3D PET1 Spooler Connector,
uses 2x - M3x4 (or taller) screws.
Reduces a rough start to your pull.
- Connect one side to a draw string (we used some PET1 Filament)
and connect it to the spooler. You'll want to use two of the pilot holes on the spooler core.
- Pull a starter piece of your bottle strip forward through the nozzle, just long to connect to it.
- Connect the second side with the screw, tight and secure.
- Start the Pultrusion command and the connector does it's job.
Check out the Demo Video here:
- Learn more about Recreator3D Pultrusion @ https://recreator3d.com/
- BUY a KB-3D MK6 Fun Size Parts Kit Here : https://kb-3d.com/store/243-recreator3d