1 / 2
Recreator 3D MK5 Kit based on an Anet A8 3D printer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project allows the conversion of an Anet A8 printer into a Recreator 3D for filament making from PET bottles.
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 420
- Wydruki
- 3
- Wyświetlenia
- 3523
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (30)Wydruki i komentarze (Wydruki: 3) (Komentarze: 32)Remiksy (1)Kolekcje (92)Powiązane
This project is based on Joshua Taylor Recreator 3D MK5 project kit, allowing the conversion of an Anet A8 3D printer into a 1.75mm recycled PET filament making machine.
It is suggested to print the geared parts in PETG at 4 walls and strong infill. The feet should be printed in TPU. All other parts can be printed in PLA.
The bottle cutter can be found here.
Required materials are:
- 2 - 2040 proflies or a 13x40cm wood/MDF board;
- 26 - M4x8mm hex screws;
- 26 - M4 T-nut for 2020;
- 1 - 625zz D-POM bearing;
- 1 - L bracket for the heating block
- 1 - 130x50x10mm MDF board for the hotend.