1 / 2
Recreator 3D MK5 Kit based on an Anet A8 3D printer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project allows the conversion of an Anet A8 printer into a Recreator 3D for filament making from PET bottles.
- Rating
- 5 / 5
- Likes
- 83
- Downloads
- 420
- Makes
- 3
- Views
- 3,523
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project is based on Joshua Taylor Recreator 3D MK5 project kit, allowing the conversion of an Anet A8 3D printer into a 1.75mm recycled PET filament making machine.
It is suggested to print the geared parts in PETG at 4 walls and strong infill. The feet should be printed in TPU. All other parts can be printed in PLA.
The bottle cutter can be found here.
Required materials are:
- 2 - 2040 proflies or a 13x40cm wood/MDF board;
- 26 - M4x8mm hex screws;
- 26 - M4 T-nut for 2020;
- 1 - 625zz D-POM bearing;
- 1 - L bracket for the heating block
- 1 - 130x50x10mm MDF board for the hotend.