Ikea Skadis hook with better tolerances
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better tolerances, slightly modified shape, reinforced and simplified attachment/removal.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 107
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Improved version of the original design by Kilian.
The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the pin in the bottom cutout and lift the hook up.
Key Changes:
Adjusted tolerances: Easier to install and remove.
Reinforced shape: Added strength to prevent snapping.
Improved design: Simplified attachment to the pegboard.
Print Settings:
Material: PETG (recommended), PLA, or ABS.
Infill: 15%+ (I used Cross-hatch).
Walls: 3 walls (or 2 walls if using a 0.5mm+ nozzle/line width).
Surface: Only one wall on top for a cleaner look.
Orientation: Print on the side for maximum hook strength.
Note: I have tested lengths up to 50mm. If you go longer, please let me know how it performs.
If you need a different size or have suggestions for improvement, feel free to contact me in the comments or via DMs.