Ikea Skadis hook with better tolerances
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Better tolerances, slightly modified shape, reinforced and simplified attachment/removal.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 1
- Views
- 107
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Improved version of the original design by Kilian.
The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the pin in the bottom cutout and lift the hook up.
Key Changes:
Adjusted tolerances: Easier to install and remove.
Reinforced shape: Added strength to prevent snapping.
Improved design: Simplified attachment to the pegboard.
Print Settings:
Material: PETG (recommended), PLA, or ABS.
Infill: 15%+ (I used Cross-hatch).
Walls: 3 walls (or 2 walls if using a 0.5mm+ nozzle/line width).
Surface: Only one wall on top for a cleaner look.
Orientation: Print on the side for maximum hook strength.
Note: I have tested lengths up to 50mm. If you go longer, please let me know how it performs.
If you need a different size or have suggestions for improvement, feel free to contact me in the comments or via DMs.