1 / 6
Prusa MK3s y-axis belt holder - GT2 — image 1
1 / 6

Prusa MK3s y-axis belt holder - GT2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.89 – €1.08 net (excluding VAT)

For file: MK3s_y_belt_holder_v2.1_0.2mm_PETG_MK3S_1h8m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.99 excluding VAT (range midpoint).

Weight reported by the author
10 g
Print time reported by the author
1.13 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

tight y-axis belt holder with fixation by GT2 profile

Rating
4.759 / 5
Likes
135
Downloads
894
Makes
26
Views
3,551
Reviews
29

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt.

The only weak point now is the stock belt holder on y carriage. To have a more stable y belt holder i designed my own one. The belt is fixed by GT2 profile and fits tight. After 3km filament printing i can say it fits still tight an nothing has loosened.

I added a generic gCode as example. My recommendation is to create your own gCode for your material you will use.

For mounting the belt holder on bed frame the stock screws M3x8 mm have to be used.

-------update 05.06.2022 v2.1

→ added a shorter version of v2.1; length reduced from 52mm to 48mm to fit with motor mount from Photogad

https://www.printables.com/model/57937-mk3s-y-axis-motor-mount-ultra

-------update 08.04.2022 v2.1

→ V2.0 deleted and V2.1 added

→ V2.1 with better mountability of the belt; increased height of the GT2 profile by 0.2mm

→ picture of test print V2.1 added; printed in blue

→ for assembly of V2.1 you need in addition two screws M3x15 and two hexagon nut M3

 

-------update 17.12.2021 v2.0

Additional version with covering of y belt.

For assembly you need in addition two screws M3x15 and two hexagon nut M3.

Tags