Roomborghini Lamborghini Inspired Decorative Top Cover for Roomba - Style Robot Vacuum
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.85 – €10.82 net (excluding VAT)
For file: Roombarghini Lamborghini style inpired mop vacuum cleaner (1)_0.4n_0.2mm_PLA_MK3.5_8h21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.83 excluding VAT (range midpoint).
- Weight reported by the author
- 154 g
- Print time reported by the author
- 8.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn your robotic vacuum cleaner into a living room supercar! This decorative top cover is designed with sharp, angular
- Rating
- 0 / 5
- Likes
- 403
- Downloads
- 371
- Makes
- 0
- Views
- 11,996
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Bold Lamborghini-inspired hood lines and vents.
Roomborghini
Available in two versions:
Full model or half STL – for large printers.
Split into 4 pieces – for easier printing on smaller build plates.
Pre-sliced G-code file included (optimized for standard Prusa MK3.5 printers).
Features:
Fits most round robotic vacuums (~32 cm scalable diameter).
Ultra-thin “lid/hat” cover – purely decorative.
Open sides for brushes and sensors.
Easy to print, assemble, and place on top of your Roomba.
Print recommendations:
Material: PLA or PETG.
Orientation: flat base down.
Supports: minimal, only for front details if needed.
Layer height: 0.2 mm (recommended).
Assembly & Mounting Tutorial
🧩 Joining the 4 pieces
Align the parts carefully before gluing.
Use cyanoacrylate (super glue) for a strong permanent bond.
Alternatively, hot glue can be used for a quicker assembly.
For a seamless finish, you can also use a 3D pen with PLA filament to “weld” the seams from the inside.
Option 1. Joining the 4 pieces - Alignment and Cyanoacrylate Glue
Align the two top pieces carefully, apply a thin layer of cyanoacrylate (super glue) along the edge, and join them. Apply gentle pressure until solid. Repeat for the two bottom pieces.
Option 2. Joining the 4 pieces - Reinforcing with a 3D pen (PLA filament)
To ensure a seamless finish and a strong bond, use a 3D pen. Heat the pen and "weld" the seams from the underside of the cover using PLA filament. This will create a robust connection that isn't visible from the top.
Option 3. Joining the 4 pieces - Reinforcing with hot glue
As an alternative or additional reinforcement, hot glue can be used. Apply a bead of hot glue along the seams on the underside of the assembled cover. This provides a quick and strong bond.
📌 Mounting on the robot
Once the cover is assembled, attach it to the top of your Roomba (or similar robot vacuum) using double-sided adhesive tape.
Apply the tape only on flat areas to ensure easy removal later.
Do not cover sensors or buttons.
⚠ Tip: Keep the cover lightly fixed so it can be removed quickly for cleaning or maintenance of your vacuum.
⚠ Note:
This is a decorative add-on only. It does not affect the functionality of your robot vacuum.
Attach it lightly so it can be removed easily for cleaning or maintenance.
If you liked this model, a coffee is always welcome ☕🙂
buymeacoffee.com/goodbuyerclub
