Roomborghini Lamborghini Inspired Decorative Top Cover for Roomba - Style Robot Vacuum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
8,85 € – 10,82 € netto (bez VAT)
Dla pliku: Roombarghini Lamborghini style inpired mop vacuum cleaner (1)_0.4n_0.2mm_PLA_MK3.5_8h21m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 9,83 € netto (środek widełek).
- Masa podana przez autora
- 154 g
- Czas druku podany przez autora
- 8,35 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Turn your robotic vacuum cleaner into a living room supercar! This decorative top cover is designed with sharp, angular
- Ocena
- 0 / 5
- Polubienia
- 403
- Pobrania
- 371
- Wydruki
- 0
- Wyświetlenia
- 11 983
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Bold Lamborghini-inspired hood lines and vents.
Roomborghini
Available in two versions:
Full model or half STL – for large printers.
Split into 4 pieces – for easier printing on smaller build plates.
Pre-sliced G-code file included (optimized for standard Prusa MK3.5 printers).
Features:
Fits most round robotic vacuums (~32 cm scalable diameter).
Ultra-thin “lid/hat” cover – purely decorative.
Open sides for brushes and sensors.
Easy to print, assemble, and place on top of your Roomba.
Print recommendations:
Material: PLA or PETG.
Orientation: flat base down.
Supports: minimal, only for front details if needed.
Layer height: 0.2 mm (recommended).
Assembly & Mounting Tutorial
🧩 Joining the 4 pieces
Align the parts carefully before gluing.
Use cyanoacrylate (super glue) for a strong permanent bond.
Alternatively, hot glue can be used for a quicker assembly.
For a seamless finish, you can also use a 3D pen with PLA filament to “weld” the seams from the inside.
Option 1. Joining the 4 pieces - Alignment and Cyanoacrylate Glue
Align the two top pieces carefully, apply a thin layer of cyanoacrylate (super glue) along the edge, and join them. Apply gentle pressure until solid. Repeat for the two bottom pieces.
Option 2. Joining the 4 pieces - Reinforcing with a 3D pen (PLA filament)
To ensure a seamless finish and a strong bond, use a 3D pen. Heat the pen and "weld" the seams from the underside of the cover using PLA filament. This will create a robust connection that isn't visible from the top.
Option 3. Joining the 4 pieces - Reinforcing with hot glue
As an alternative or additional reinforcement, hot glue can be used. Apply a bead of hot glue along the seams on the underside of the assembled cover. This provides a quick and strong bond.
📌 Mounting on the robot
Once the cover is assembled, attach it to the top of your Roomba (or similar robot vacuum) using double-sided adhesive tape.
Apply the tape only on flat areas to ensure easy removal later.
Do not cover sensors or buttons.
⚠ Tip: Keep the cover lightly fixed so it can be removed quickly for cleaning or maintenance of your vacuum.
⚠ Note:
This is a decorative add-on only. It does not affect the functionality of your robot vacuum.
Attach it lightly so it can be removed easily for cleaning or maintenance.
If you liked this model, a coffee is always welcome ☕🙂
buymeacoffee.com/goodbuyerclub
