Desktop Helical Savonius VAWT
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.29 – €4.02 net (excluding VAT)
For file: helicalsavonius_k-12_02mm_pla_mk3s_4h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.65 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 4.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Helix Wind model has been modeled to be printable and mountable for display and experimentation.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 479
- Makes
- 1
- Views
- 2,929
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
This Helix Wind model has been modeled to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was developed to test power generation and wakefield generation during an undergraduate research project. If mounted correctly, this model will rotate in both wind and water testing environments.
May be used with the custom design base - https://www.prusaprinters.org/prints/19977-vawt-base-mount
Print instructions
Category: Engineering Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Notes:
Center shaft mount accepts a 5/16" wooden dowel. Dowel can be fastened with glue, a screw, or a pin to prevent rotation on the shaft.