Prusa CoreOne Door Handle Nut Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.26 – €0.32 net (excluding VAT)
For file: Prusa CORE One Door Nut Cover_0.4n_0.2mm_PETG_COREONE_15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 14.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I started printing Nylon on the CoreOne and the adhesive on the door handle was quickly coming loose.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 16
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I started printing Nylon on the CoreOne and the adhesive on the door handle was quickly coming loose.
I initially secured the handle with a screw and a locking nut, but I didn't like the look, so I designed this cover to fit a leftover M3nS nut from the assembly kit.
BOM
- 2x M3nS (I got them from the leftover nuts in the kit)
- 2x M3x10 Screw
- 2x M3 whaser
- PETG (~5g)
I printed them very strong
- 4 Walls
- 25% Infill Gyroid
- 5 Top and Botom Layers