Prusa CoreOneL Waste Bin
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.67 – €3.26 net (excluding VAT)
For file: CoreOneL_Bin v5_0.2mm_3DFOX PETG @ C1L HF_1h44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.97 excluding VAT (range midpoint).
- Weight reported by the author
- 67 g
- Print time reported by the author
- 1.75 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Compact waste bin for Prusa Core One L to keep inside the printer tidy
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a compact waste bin designed specifically for the Prusa Core One L, helping you keep the inside of your printer clean and tidy.
During printing, filament purges, stringing, and small leftovers tend to accumulate inside the printer. This bin gives you a simple and convenient place to dispose of them instead of letting them scatter around the build chamber.
Key features:
designed for Prusa Core One L
keeps filament waste contained and out of the way – collecting purge lines and disposing of filament leftovers
quick and easy installation
clean, minimal design matching the printer interior
optional magnetic mounting
Mounting:
For a more secure hold, you can insert 2× magnets (Ø6 mm × 2 mm), but it also works fine without them.
Compatibility:
fully compatible with stock Core One L setup
shown in photos with dust covers by @dancan13f, but works perfectly with or without them
Design notes:
The model was created from scratch based on official Prusa CAD files:
https://www.printables.com/model/1520379-prusa-core-one-l-full-cad-assembly
Dust covers used in photos:
https://www.printables.com/model/1235883-prusa-core-onel-dust-protector
Printing notes:
recommended material: PETG or PLA
infill: 15–25%
no supports required
print orientation as provided in STL