1 / 1
Mount for the official 7" Raspberry Pi Touchscreen Case on a Prusa CoreOne. Compatible with the PI3 and PI4 case.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the official 7" Raspberry Pi Touchscreen Case on a Prusa CoreOne. Compatible with the PI3 and PI4 case.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Maturity: Very Good.
- 7 prototypes.
- In use since 2025/05.
Hardware:
- 2x M4x16 ISO7380 to fix the screen case on the mount.
- 2x M3 DIN 562 square nuts
- 2x M3x10 (length 10mm minium) ISO7380 or ISO4762 screws
Insert the 2 M3 screws instead of the plastic rivets.
Screw the M4 in the upper part and leave 3mm between the plate and the head screw. The inner holes are for the PI4 screen and the outter holes for the PI3 screen.
Log:
- 2025/09/17: HEPA filter cut version. Small changes.
- 2025/05/13: Initial release