Silicone Sock Mold, for Nextruder/MK4/XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this easy silicone sock mold to make your own socks for the MK4 and XL today!
- Ocena
- 4,8 / 5
- Polubienia
- 245
- Pobrania
- 636
- Wydruki
- 15
- Wyświetlenia
- 6307
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This silicone sock mold is used to create socks for the Nextruder hotend, which is used on the MK4 and XL.
It consists out of 3 parts, and is easily assembled and put in a clamp to keep it closed.
The middle part requires some supports, and the rest can be printed without, I recommend using the orientation as it's loaded in the slicer.
When making the sock make sure to use silicone that is temperature resistant. You have to look specifically for continuous usage as many companies only specify the resistance for a short period of time.
Cleaning up can be done with some flush-cutters, make sure to use sharp ones.
These socks will soon also be available at shop.levendigdsgn.com, made out of the same material as all the other Sock-X products.