Gridfinity Bin for Prusa Nextruder Nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Each bin holds 5 nozzles. They fit regardless of whether they are in the plastic case or not.
- Ocena
- 5 / 5
- Polubienia
- 144
- Pobrania
- 559
- Wydruki
- 21
- Wyświetlenia
- 2001
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch.
If you are unfamiliar with the Gridfinity system, watch Zach's original video below.
This bin holds 5 nozzles in a 2x2 Gridfinity grid. My bins needed to be low enough to fit in shallow drawers, so they sit at a low angle. I also wanted the flexibility to store nozzles in the case or not, since some of my older nozzles didn't come with cases. Either way, it is easy to see what you have and grab them.
Printing is easy, I used 0.2mm layer height with PETG. If you want a contrast rim like I have, just add a color change at 41mm in your slicer.