3175 modeli
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.
Wydruk około 3,53 €–4,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.
Wydruk około 2,84 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For assembling all the small parts one gets when 3D printing, a little wrench which can be used for M3 sized nuts.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…
Wydruk około 4,90 €–5,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Wydruk około 8,24 €–10,07 € nettoWstępna wycena jednego wariantu
Vertical holder for standard metric wrenches.. 6-7, 8-9. 10-11, 12-13, 14-15, 16-17, 18-19, 20-22
Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu
Just print it on a back side, no supports needed. Fitted by glue, in my case Mamut glue from company Den Braven. 40 % infill, gyroid and 4 perimeters = strong enough Mine is made of PLA. Color change is already done in .gcode Enjoy. See…
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple and compact mount for flat wrenches. I designed these for the JAEGER 24pc IN/MM wrench set (https://amzn.to/3CKJVat). Use the included Fusion 360 file to customize for your wrench sets. Use a simple color change to create the…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After I had printed the NASA space wrench in PETG, I realized that the wrench is actually tougher than I thought. I put a metal socket on it and it felt like it could really be able to tighten some screws. Since I needed something to…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printer Nozzle Torque Wrench designed by Anders Olssen. Not only for ruby nozzle:-) *update 17.9.2022: Added the correct PETG GCode-Files
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small tool for tightening and loosening the thumb screws used on GoPro mounts. Tuck it in your camera bag, stick it in your pocket, or attach it to a key ring! The wrench has recesses for both types of thumb screws used on GoPro mounts,…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Mini hex wrench for 7mm (M7) nuts. Useful when removing/attaching wheels to various RC cars.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
An organizer for small wrenches. I ordered a set of 10 wrenches (4mm-10mm) on Amazon (ASIN B01MDUUHHO) that came without proper storage, so I made this organizer for them. Should of course also fit other small wrenches :-) Print…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Sometimes the Revo nozzle is a little difficult to remove by hand and I didn't want to take pliers to the nice sock, so I designed this simple wrench. Please don't use it to tighten the nozzle – it isn't necessary and I don't want to make…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I've included a Fusion360 archive so that you may easily modify these to fit your sets. I cranked them out in PETG with an 0.6 mm nozzle with a 0.40 mm layer height.
Wydruk około 2,92 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here' a fully configurable hook wrench similar to DIN 1810 Form A . Form B would have a pin as a hook and is not contained, but Form A is ideal for 3D printing . This time the difficulty of the part needed me to use Onshape. Unlike the…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: wrench for badly accessible nuts under the sink long handle (14cm) wrench/nut 12mm for threaded rod up to 8,2mm (which fits inside the wrench middle hole) remixed original (thx volkhen !), because i needed: different nut size longer…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Klíčenku lze připnout na klíče za očko na levé straně viz obrázek. S klíčenkou jdou povolovat a utahovat šestihranné 10mm šroubky a matičky, funkčnost je ale omezena materiálem, ze kterého je klíčenka vyrobena.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for my 7 pc set Kobalt wrench set: 3/4 in to 3/8 in. Same length as "shelf-4". Print Settings Printer: Prusa I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% (gyroid - for rigidity) Filament: Hatchbox PETG Green
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA works fine for print, however PETG would be bit better as it is less brittle. I printed in PLA. Clearances in hinge are quite big (0,6mm from each side).
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Printing instructions For the best results, I recommend PLA, 0.15mm layer height, 3 perimeters and 20% infill or denser. A little force is required when using for the first time. T-shirt Support me & Buy a T-shirt
Wydruk około 8,63 €–10,55 € nettoWstępna wycena jednego wariantu
A little tool to help removing an overtightened filter holder, or just to be used on a regular basis. Print settings (~1h 25m): - no support - with a 0.4 nozzle - set to 0.6 line width - 0.28 line height - 2 walls - 100% infill (/20%…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
When you came here, you probably know the situation where an SMA connector won't come off easily even though it was only screwed on “finger-tight”. And of course, the connectors are so close together that you can't get in with normal…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Use this wrench to remove and install nozzles on the nextruder heat block. Clean the nozzle, let it cool, unscrew the two screws that hold the nozzle and while holding the heat block use this wrench to remove or install the nozzle. This…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You must put a pause(M600) at 3.80 layer height and insert a 5 euro cents coin. (Otherwise after printing finish isn't possible to insert the coin properly…!)
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wheel Wrench/Shock Cap Tool for easy disassembly of wheels and damper bodies. A dedicated set of RC tools are a must when getting into this hobby. Why not have some 3D Printed ones in the collection as well? Save some money with these…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the very cool "Finger Hex Wrench" by RonaldWalters at https://www.thingiverse.com/thing:3985566 I wanted to challenge myself and do a complete from-the-ground up redesign (reimplementation?) of the original finger wrench in…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Simple m4 wrench. Two versions with different head shape. Dimensions: 15,5 × 53 mm (hex head) & 15 × 51 mm (round head) I'd suggest higher infill and/or more perimeters (included gcode has 50% infill & five perimiters).
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This was made for an older acquaintance of mine who has arthritis and finds it difficult to unscrew a Coke plastic bottle cap. These 30mm (~1.18") bottle caps are common, so this wrench should work on other brands as well. Print…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Useful nozzle wrench for 7mm socket. You can use it in small spaces. Designed for one-handed ease of use.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wrench I designed to fit a 66mm diameter jar lid. I made it in ABS with 4 perimeters for strength.
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Coaxial grip that can hold and work with 1.5/2/2.5/3/4/5/6mm hex wrenches. There seems to be no exact standard for the radius (R) of the L-shape of a hexagonal wrench, but we have made it correspond from R=S to about R=Sx2. ( S = distance…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Having printed Manuel's original wrench, I found the 7mm socket bit I had in my Makita toolset was a bit loose and protruded further than I'd like. This remix is a minor change to increased the depth of the bit holder hole to 20mm from…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for the classic Park Tools Y wrench. Holds the Y wrench slightly away from the pegboard and tilted out so it's easier to grab and they can be mounted closer together (as in the photo) without interfering. Fits newer style…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Sometimes the accessories for the Kenwood Cooking Chef (XL) are screwed too tightly. These are then somewhat unwieldy and difficult to loosen. For this I have now created a remedy with which it is easy to loosen the parts. Print…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
The is a wrench used to tighten or loosen the nut on reloading dies with a 1-1/8" nut.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update April 20, 2022 : My original “wrench” works well for the two types of bottle caps it was designed for, but not for some other slightly smaller (29.5mm diameter) bottle caps. Note that I printed this new version with a 0.2mm layer…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Tiny tool to open a stuck Presta valve nut (not to remove the valve). These are quick to print and are small enough to throw a couple into a bicycle toolkit in case of emergency. Works best with PETG on 0.15mm.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact and functional holder for hex keys, optimized for the most common sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm. Each slot is clearly marked with the corresponding size, so you can quickly grab the right tool. Perfect for the…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
This holds the 7 Wera Wrenches in place. Distance of 5mm mounting holes is 45mm from hole to hole. PLA or PETG with 15% infill and 0.2mm layer height will do the job, print orientation as ist comes from the STL file. For the IKEA Skadis…
Wydruk około 5,43 €–6,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small wrench for 11mm nut which is used to hold kitchen or bathroom faucet. For easier mount I also printed a 40mm bushing because threaded rod was very long. I've uploaded few versions of this wrench. If you use bushing then it's…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
The new MMU2S "chimney" makes it a pain to remove the Festo fitting without a wrench handy. Presto, wrench. Print instructions I do mine in PET, PLA should be fine too. If you need to adjust tolerances, check the SCAD source. I originally…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model to remove SuperTech ST3614 oil filters which have 15 flutes and a 75.1mm outer diameter. This filter is a rebranded Champ Labs PH2835. When loosening a used filter, the oil will run down the outside of the filter,…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
A tool used to remove the preloader from the shock tube of a bicycle fork. I decided to do some maintenance on my shocks and didn't have the tool I needed for it. This was one of those situations where my alternatives were buying a $10…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print-in-Place 17mm Ratcheting Wrench I made this wrench just to test the concept. Of course it's not suitable for real screws, but maybe for printed screw? It also makes a nice fidget toy.
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
5mm hex key/allen wrench for locking and unlocking or dogging and undogging pushbars on doors. At least that what I needed. Maybe you just need a 5mm allen key on a keychain. Who am I to judge. If you're using this for doors, there are…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This is very compact wall mount holder / IKEA Skadis Pegboard holder for metric Wera Joker 6000 wrenches. It's width is below 57mm so this set wont take to much space on your tool wall. Screw holes are 5/7mm at 45mm distance. If you are…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
I recently lost the wrench to tighten the different bits on my Dremel 4000. With this 3d part, I can get my machine working again.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wrench to undo your Faema E61 group head mushroom and flow restrictor/ filter mesh cap. The size is 36 mm on one end and 22 mm on the other. I used it on my Rocket Appartamento (sizes should be the same for other brands but…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Find 3D-Printed RC cars here.
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
You can use the organizer with Allen keys, drill bits and screws sizes from 1.5 to 5 mm, the holes are automatically adjusted to the needed diameter so no trying to find the right space, just stick it there. In the video I imbed magnets…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
This is not exactly NASA wrench, but it is also easy to print and you can use it in so many different ways (see complete video below :) If you print this thing, I will be happy to see your make in "Post a make". Print Settings Printer…
Wydruk około 2,35 €–2,88 € nettoWstępna wycena jednego wariantu
I successfully printed this on the first try. Here is what I did: Unmodified PRUSA MINI Overture Matte Orang PLA 200 at
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Simple combi tool for quicker and easier application of the “Nylock Mod”. One end of the tool can be used as a wrench to turn the nylock nuts. The other end contains an 6mm socket where you can press in one original spacer of your heating…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this tool to calibrate the genial "Torque Wrench Handles from 1.0Nm up to 3.0Nm" There is such a tool showed on the fotos, but no file for it added.…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
1/2" socket wrench holder it's pretty generic and should fit most socket wrenches out there. I printed it upside down with 10% infill and organic support, to get a nice smooth top surface. You can hang it on a peg board or wall with this…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is another pegboard hanger for wrenches. I couldn't find one that was just simple, organized the wrenches in a neat line and fit in the pegboard. You can rotate the angle of the print to reduce support needed and increase strength. I…
Wydruk około 4,35 €–5,31 € nettoWstępna wycena jednego wariantu
Cartridge wrench e.g. air rifles, The most common standard Walther, Feinwerbau, Steyr, Anschütz…….
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
3/8" socket wrench holder it's pretty generic and should fit most socket wrenches out there. Print with 10% gyroid/grid infill and organic support from build plate only. You can hang it on a peg board or wall with this adapater biltema or…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
I kept poking my hand with the screw side of the Dremel wrench, so I decided to create a small handle for it. Printed in Prusament PETG Jet Black. Prints in about 30 minutes with Prusa Slicer default settings for the 0.20mm QUALITY…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this as a finger wrench / wing nut tool to help me remove/apply an M6 locking nut on a long threaded bolt. This little tool allows you to get enough torque with just your fingers for screwing a locking nut in places it might be…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Socket wrench 1/4" and sliding t-bar holder combo 1/4" socket wrench holder it's pretty generic and should fit most socket wrenches out there, the same goes for the sliding t-bar. Print it with 10% gyroid infill, and support organic on…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena jednego wariantu
Model Info | Introduction I want to introduce you to an easy-to-print tool / wrench/ key for two sizes of aerator taps :) Use 5 perimeters for a really strong tool - I had no problem with PLA and tight fit. If you chose the wrong size: no…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This wrench is meant for quick adjustment of the y-axis bearing tension of the U-Bolt screws. This is very helpful to improve bearing alignment, noise level as well as other issues such as ringing/ghosting. Model in the photo is printed…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The provided print file is highly unoptimized but designed to be easily printed DISCLAIMER: This model features a screw for holding the key in place. I recommend screwing a METALLIC M6x1 through the hole before first using it to properly…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena jednego wariantu
This wrench is for MK8 nozzle
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This wrench holder was created to fit 7 small to medium wrenches with minimum material and maximum strength. Enjoy !
Wydruk około 4,10 €–5,01 € nettoWstępna wycena jednego wariantu
some printable wrenches Those wrenches are surely not the strongest ones but they can still be used if the torque doesn't get too high. Sizes: 3,2/ 4/ 5/ 5,5/ 6/ 7/ 8/ 9/ 10/ 11/ 12/ 13/ 14/ 15/ 16/ 17/ 18/ 19/ 20/ 22/ 24/ 27/ 30/ 32/ 36/…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Needed some words on it to be compliant at work.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wrench for tightening / loosening star locks for your dumbbells / barbells. I usually can't get them tight enough and they come loose after a few reps. With this wrench you can tighten them much better. See Picture 3 for Dimensions. I…
Wydruk około 14,23 €–17,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About I needed to find a way of tightening nuts on various pieces of electronics hardware (audio jack sockets, knobs, switches, etc) and normal metal sockets were too short, scratched front panels and enclosures, and were difficult to…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
This design was inspired by "Patent Remake: 1909 Ratchet Wrench" video on YouTube, where he found an expired patent from 1909 were the ratchet action of this wrench was very simple yet effective, and this model is 3d printable version of…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
![[HSW] Wrench to empty](https://media.printables.com/media/prints/172499/images/1626482_edc53726-8f98-4b1c-b524-c93be3c96a3b/pxl_20220416_232155619.jpg)
![MMU Festo Wrench [SCAD]](https://media.printables.com/media/prints/1625/images/10328_b6e5e992-d181-49b3-a248-a4b0f159bcb5/lol-mmuwrench_pic01.jpg)
