1 / 3
Küpper and Skadis Proxxon Slimline combination wrench holder — zdjęcie 1
1 / 3

Küpper and Skadis Proxxon Slimline combination wrench holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Space saving Proxxon wrench holder for both Küpper and Skadis pegboards. Several sizes available

Ocena
0 / 5
Polubienia
273
Pobrania
659
Wydruki
0
Wyświetlenia
4923
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench.

Available models

Proxxon has several versions of it's combination wrenches with varying sizes. I've added a few of them to the file list. If you have a Proxxon Slimline set that is not listed, let me know and I might be able to add it.

All models can be used either complete if that fits your print bed use the split version that is provided for each. 

  • Sizes 6 - 32mm - 21 pieces

  • Sizes 6 - 21mm - 15 pieces

  • Sizes 6 - 32mm - 21 pieces - Extended with 26 and 36
    This one is a bit of an odd duck and tailored to my own situation. I've extended my own set with size 26 and 36 for E61 espresso machine maintenance.

Print instructions

Print the models upside down so that the top is facing the build plate. The exported models should already be positioned this way.

  • 0.2mm layer height

  • 3 or more perimeters

  • 15% Gyroid infill

  • The model is printed upside down, so increase the bottom layers a bit, I've used 5.

Install instructions

The mounting pegs on the tool holder are a bit of a snug fit. It can help to use a rubber hammer and give a few soft taps on the top to get the holder properly seated.

I don't have a multicolor printer yet, so the text is indented. I've used a very sharp carpenters pencil (Pica dry) to give the numbers a bit of contrast. Don’t use an ink based marker on the side of a print, as the capillary effect of the layer lines will spread the ink.

If there is a demand then I can look into making multicolor options.

Tagi