Canister Opening Wrench 1L - 60L (DIN 45 / DIN 51 / DIN 61, Ø 48 - 58 - 65 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,95 € – 2,38 € netto (bez VAT)
Dla pliku: Spanner-v1-DIN51_0.3mm_PETG_MK3S_1h43m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,17 € netto (środek widełek).
- Masa podana przez autora
- 39 g
- Czas druku podany przez autora
- 1,72 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Universal spanner + insert for opening lids of canisters from 1L up to 60L (DIN45 , 48mm | DIN51 , 58mm | DIN61 , 65mm)
- Ocena
- 4,875 / 5
- Polubienia
- 67
- Pobrania
- 558
- Wydruki
- 8
- Wyświetlenia
- 2421
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the required size.
- Ver.1 - was only for 5-10L(DIN 51) canisters
- Ver.2 - supports DIN 51 as well as larger canisters from 20-60L(DIN 61), grip has been made slightly sturdier
- Ver.3 (28/4/2022) - increased thickness on DIN 51 side for improved rigidity. Added an optional DIN 45 insert for opening 1L-2L containers. Also added labels and a multicolor G-code for manual filament swapping in the first and last layers.
These lids are used on many containers, e.g. cleaning detergent or fertilisers.
STEP-file included for adjustment.
Please leave a make and review if you enjoy this model! Thanks
What worked for me:
Material: PET-G
Layer Height: 0.3mm
Infill: ≥25%, grid
Perimeters: ≥3
Top/Bottom Layers: 0