1 / 2
Faucet Aerator Removal Tool Wrench - 2 in 1, Standard 24 mm and 20 mm Option — zdjęcie 1
1 / 2

Faucet Aerator Removal Tool Wrench - 2 in 1, Standard 24 mm and 20 mm Option

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,21 € – 0,26 € netto (bez VAT)

Dla pliku: gcode.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,23 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
10,8 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Easy-to-print tool / wrench/ key for two sizes of aerator taps

Ocena
5 / 5
Polubienia
31
Pobrania
130
Wydruki
3
Wyświetlenia
602
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Model Info | Introduction

I want to introduce you to an easy-to-print tool / wrench/ key for two sizes of aerator taps  :)

Use 5 perimeters for a really strong tool - I had no problem with PLA and tight fit.

If you chose the wrong size: no problem! Just print the 20 mm inlay (colored brown) afterwards, and you are good to go when you have a smaller aerator. Standard is 24 mm in Germany.

Interested in the technical details? Here you go. Standard is 24 mm with narrowing to 22 mm.

Print Settings

· 5 perimeters are recommended. For easy fit, the standard 2 perimeters work, too.

· It was designed for easy printing and should work just right away :)

ADUDINO 3D Models. Get exclusive and practical designs. Please respect the copyright.

Tagi