Faucet Aerator Removal Tool Wrench - 2 in 1, Standard 24 mm and 20 mm Option
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy-to-print tool / wrench/ key for two sizes of aerator taps
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 126
- Makes
- 3
- Views
- 595
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Model Info | Introduction
I want to introduce you to an easy-to-print tool / wrench/ key for two sizes of aerator taps :)
Use 5 perimeters for a really strong tool - I had no problem with PLA and tight fit.

If you chose the wrong size: no problem! Just print the 20 mm inlay (colored brown) afterwards, and you are good to go when you have a smaller aerator. Standard is 24 mm in Germany.

Interested in the technical details? Here you go. Standard is 24 mm with narrowing to 22 mm.

Print Settings
· 5 perimeters are recommended. For easy fit, the standard 2 perimeters work, too.
· It was designed for easy printing and should work just right away :)
ADUDINO 3D Models. Get exclusive and practical designs. Please respect the copyright.