P
PrintablesOscar Padilla
XYZ Test Cube 20mm
A test cube with measurements of 20mmx20mm
- Downloads
- 32,703
- Likes
- 1,231
- Rating
- 4.96
Search results: 20mm
3,904 models
P
PrintablesBryan
Digger - Skid Steer 20mm
A mini skid steer digger 20mm in width. Scratch remodeled version of “Gophergames” Skid Steer to fix model geometry issues, resized to 20mm, done in Solidworks. Because the 10mm version is a choking hazard for small children this bigger…
- Downloads
- 3,391
- Likes
- 625
- Rating
- 4.8
P
PrintablesFallen
XYZ - 20mm Calibration Cube With Mini Tests
Just your average XYZ cube with a few extras.
- Downloads
- 1,481
- Likes
- 109
- Rating
- 4.96
P
PrintablesJan Olejnik
TinaTina - 90mm brushless drone frame (1103/20x20mm)
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
- Downloads
- 683
- Likes
- 183
- Rating
- 5
P
PrintablesMykashy
Metric Screw Measuring Tool M6-M27 up to 120mm
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
- Downloads
- 355
- Likes
- 141
- Rating
- 5
P
Printablesads_will
literally just a 20mm cube
Literally just a solid 20mm cube. You can scale it to any size. quick printing time aswell
- Downloads
- 272
- Likes
- 10
- Rating
- 5
P
Printablespijusn
Baby Crib Mount for Tapo C200 / C210 (20mm)
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
- Downloads
- 266
- Likes
- 27
- Rating
- 0
P
PrintablesGracro
20mm Flex Conduit Flange
This is a snap on flange to terminate 20mm (nominal) flexible corrugated conduit flush with a surface- i.e. drywall/plasterboard. I made this so I can run the speaker wires to my rear home cinema speakers through the walls inside conduit.…
- Downloads
- 238
- Likes
- 37
- Rating
- 5
P
Printablesteslapunk
Inner Radius Gauge / Fillet Gauge 1mm - 20mm with stand
These 5 gauges let you measure radiuses from 1 to 20mm. PLA with 0.2mm layer height will be fine, you may want to use two different colors, so a different one for the values. I recommend a light color for the fillets. This was created…
- Downloads
- 237
- Likes
- 39
- Rating
- 4.88
P
PrintablesMeca Dynamics
RTX 3080ti Msi Ventus 3x shroud 120mm fan mod
Tired of the noise and heat your RTX 3080ti Msi Ventus 3x is making? I designed this custom shroud to let you mount two 120mm fan directly on your gpu rad. I recommend you to undervolt your gpu with this mod to benefit of low noise level…
- Downloads
- 198
- Likes
- 22
- Rating
- 5
P
PrintablesSquish.De.Kat
Bladeless fan powered by 120mm AC/DC fan, MK3/S/4/5, minimum support and assembly
Summary This is my attempt to design, print and make the largest bladeless fan a MK3 can print. It can be powered by a 120mm DC, or AC fan. Using a AC fan will yield much higher wind volume, you can also easily find 120mm AC fan with…
- Downloads
- 197
- Likes
- 19
- Rating
- 0
P
PrintablesA.K. Engineering
Spring 8mm X 20mm
Spring 8mm X 20mm. Print in PETG with 0.1 mm layer height. No Supports required. I needed these for: https://www.printables.com/de/model/408942-sliding-legolini-pump-action-repeating-mini-bow
- Downloads
- 143
- Likes
- 7
- Rating
- 0
P
PrintablesHydrotatic
HexTile SpacerTool 20 - Sound Hex tile spacer 20mm
I was installing hex sound tiles for my backdrop to reduce sound echo, and I couldn't find something good enough to get a consistent and level gap between the panels. Specifically the 3-way intersection so I made HexTile SpacerTool 20 You…
- Downloads
- 135
- Likes
- 60
- Rating
- 0
P
Printablescreativemario
G3/4" Screw Thread to 20mm Metric Conduit Coupler (UniFi Protect Camera Backbox / UACC-Camera-CJB and others)
We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK. We wanted to use standard 20mm PVC conduit, which…
- Downloads
- 120
- Likes
- 7
- Rating
- 5
P
PrintablesObe_Design
PVC pipe holder 15mm - 20mm
These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…
- Downloads
- 117
- Likes
- 26
- Rating
- 5
P
Printablesalain
Einfacher Haken 20mm für Skadis Board
Einfacher Haken 20mm für Skadis Board
- Downloads
- 103
- Likes
- 7
- Rating
- 5
P
PrintablesAWSW
3 x 120mm Arduino controlled RGB LED fan holder
A colleague had some spare 120mm RGB LED pc fans lying around and he asked me if i could create a holder for them to be used as a ventilator. He wanted to be able to control the fan speed and the LED color as well. What began as a quick 1…
- Downloads
- 90
- Likes
- 49
- Rating
- 5
P
PrintablesBryant
Tischbein verstellbar 105mm (+20mm)
sehr einfach zu druckendes & stabiles Tischbein
- Downloads
- 89
- Likes
- 6
- Rating
- 0
P
PrintablesJack J
Drone foot for STEELE 5 220mm fpv frame. 1/4
Drone foot for STEELE 5 220mm fpv frame. need to print 4
- Downloads
- 63
- Likes
- 4
- Rating
- 0
P
PrintablesTerence - AMakerDad.com
Festool MFT (20mm) expanding nut
This is a print-in-place expanding mandrel nut mechanism used for clamping tooling and other fixtures to a Festool MFT table. Recommendation to print this part in PETG with organic breakaway supports. I have included my print file from…
- Downloads
- 50
- Likes
- 15
- Rating
- 0
P
PrintablesBlacky51
Würfel mit geometrischen Formen, 20mm
PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand
- Downloads
- 28
- Likes
- 7
- Rating
- 0
P
PrintablesCristi
Double hook for 40x20mm metallic bar
I need some fairly solid hooks to hang various objects above my head in the garage. These hooks should be attached without drilling to a grid fixed on the ceiling of the garage made of 40x20 metal bars (anyhow, I left a screw hole in the…
- Downloads
- 28
- Likes
- 4
- Rating
- 5
P
PrintablesSamael
PC 120mm and 140mm fan desk / under desk mount
The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
Printablesxyhbhtt
120mm Fanshroud for PNY XLR8
I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount Per Shroud you'll need: M3x6mm Countersunk Screw x3 M3 Nut x3 (Optional)…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesMaker Don
2023 Chrysler Pacifica center console 120mm fan mount
I'm an amateur radio operator and have installed a 50w VHF/UHF mobile radio in the retractable storage bin that's embedded within the center console of the 2023 Chrysler Pacifica. This fan mount replaces the removable cup holder and…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printablesnorthendtrooper
120mm to 90mm 90degree
120mm fan to 90mm in a 90 degree bend adapter for enclosure. 120mm to 85mm 90degree. Smaller diameter for HVAC piping to slip over and clamp onto adapter.
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesBoogie
Screw measuring tool, M2-M10, 4-120mm
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
- Downloads
- 93,849
- Likes
- 29,361
- Rating
- 4.93
P
PrintablesNoctua_at
High-efficiency Noctua 120mm fan grill
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
- Downloads
- 14,235
- Likes
- 1,970
- Rating
- 4.89
P
Printablesderzoelli
XYZ Calibration Cube 20x20x20mm
XYZ Calibration Cube 20x20x20mm
- Downloads
- 6,929
- Likes
- 112
- Rating
- 4.89
P
PrintablespoundCake
XYZ Calibration Cube - 20mm x 20mm x 20mm
iDig3Dprinting Calibration Cube < link >
- Downloads
- 6,438
- Likes
- 30
- Rating
- 4.93
P
Printablesreddaugherty
120mm Fan Grill
A fan grill for a 120mm PC fan. Designed in Fusion 360.
- Downloads
- 5,906
- Likes
- 491
- Rating
- 4.95
P
PrintablesBuggi
T-Nut M3, M4, M5 for 20mm profile
These are T-Nuts for the common 20x20mm Aluminium Extrusion profiles many printers are made of. I designed them for my Profore Original 3D-Printer to attach things like cable clamps etc. While designing, I learnt that the profiles look…
- Downloads
- 4,438
- Likes
- 196
- Rating
- 4.79
P
PrintablesDmytro
120mm Desk Fan
UPDATE 2024-05-29: Updated to V2. Added 140mm version and uploaded the source file. Parts to make a 120mm or 140mm PC cooling fan into a desk fan. A single M6x30 Hex bolt and M6 nut connect the fan to the stand. With an option to embed…
- Downloads
- 4,305
- Likes
- 775
- Rating
- 4.9
P
PrintablesNiiskar
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
- Downloads
- 3,322
- Likes
- 2,420
- Rating
- 4.79
P
PrintablesJoris Calvat
Spiral cable wrap - 2mm to 20mm Inner Diameter
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
- Downloads
- 3,273
- Likes
- 1,500
- Rating
- 4.83
P
PrintablesRESTLESS DESIGN
Fan Spacers (120mm & 140mm)
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
- Downloads
- 2,514
- Likes
- 140
- Rating
- 4.83
P
PrintablesHassan Saleh
Sardine Fishing Lure 120mm
This is a fishing lure I have been designing and upgrading for a while now, it uses 6mm ball bearings for weight, stainless steel wire for line tie and rear hook hanger, and a swivel for belly hook hanger. Checkout LureForge , the…
- Downloads
- 2,402
- Likes
- 297
- Rating
- 4.8
P
PrintablesJonas Pedrotti
Dupont Cable Organizer 10 & 20mm with optional Skadis hooks
I like my jumper cables to have a tight fit, so i adjusted the lenghts and turned it into a single print object. The Skadis hooks can be pushed into the dovetail connection, but be carefull when inserting them, because it is a very tight…
- Downloads
- 2,309
- Likes
- 433
- Rating
- 4.77
P
Printablesad5ou
120mm APFSDS full size replica (Tank Sabot round)
UPDATE May25-2023: Added additional files for printing main canister portion on smaller printers. Split canister sections also have 3mm holes to help with alignment during assembly. This is a full sized printable model of an M829A1. The…
- Downloads
- 2,042
- Likes
- 283
- Rating
- 5
P
Printableswafflecart
120mm Fan Cover / Mesh filter
A 3D Printed Fan Cover / Mesh Filter. Prints out single straight lines criss crossing. See close up pictures. It is memorising to watch it being printed! Do a colour change on the first and second layers in your slicer to add a shimmering…
- Downloads
- 2,027
- Likes
- 241
- Rating
- 4.73
P
PrintablesThePrintCoder
Picatinny Rail Riser 20mm with M5/M3 Slot
This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…
- Downloads
- 2,002
- Likes
- 259
- Rating
- 4.67
P
Printablesschreider
Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ 120mm & 4010 fan
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
- Downloads
- 1,883
- Likes
- 573
- Rating
- 5
P
Printablestyler
120mm Fan to 4 Inch Duct (+F3D file for other sizes)
This is an adapter to connect a 120mm PC fan to a 4 inch duct/pipe/dryer hose. I know there are already models like this out there, but I always find something I wish was done a little differently, so here's mine. It has the following…
- Downloads
- 1,850
- Likes
- 136
- Rating
- 5
P
PrintablesAlephBaker
2.5" & 3.5" Vertical HDD Mount - Fan-Mounted (2x-7x, 120mm/140mm)
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
- Downloads
- 1,821
- Likes
- 155
- Rating
- 4.8
P
PrintablesRESTLESS DESIGN
120mm Angular Louvre Fan Grill
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
- Downloads
- 1,815
- Likes
- 309
- Rating
- 4.89
P
PrintablesArmored Carbon
Hexagon Fan cover 80mm, 120mm, 140mm
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
- Downloads
- 1,682
- Likes
- 136
- Rating
- 5
P
PrintablesPrismaPrints
Garden Hose Adapter / Connector (20mm hose)
A very simple connector for elastic garden hoses. It's designed for hoses with an inner diameter of 20 mm, so if you're connecting hoses with a different inner diameter, you need to scale the model accordingly. Recommended print settings:…
- Downloads
- 1,532
- Likes
- 398
- Rating
- 5
P
Printables3Dag
Airless basketball two sizes 240mm and 120mm
Since I saw the model of NBA, I had the challenge of creating it myself, it was done through Fusion 360. It is a basketball which is not filled with air, has a hollowed design and comes in two sizes. The first file contains a 120mm…
- Downloads
- 1,489
- Likes
- 52
- Rating
- 5
P
Printablesdr.dentz
Soldering fume extractor for 120mm fan
This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…
- Downloads
- 1,406
- Likes
- 262
- Rating
- 4.9
P
PrintablesBaGooN
Thermalright AXP90-X47/X53 CPU Cooler 92mm to 120mm Fan Conversion Adapter
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
- Downloads
- 1,370
- Likes
- 91
- Rating
- 5
P
PrintablesMetikumi
Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
- Downloads
- 1,349
- Likes
- 148
- Rating
- 5
P
PrintablesFyrby Additive
120mm Fan To 100mm Pipe Adaptors
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 120mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
- Downloads
- 1,270
- Likes
- 180
- Rating
- 5
P
PrintablesTuffLucky
M3 Screw Collection (3mm - 20mm)
M3 Screws, Length 3mm-40mm All made in Autodesk Fusion360
- Downloads
- 1,265
- Likes
- 47
- Rating
- 5
P
PrintablesBasementLAB
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
- Downloads
- 1,244
- Likes
- 145
- Rating
- 4.67
P
PrintablesCabbitCastle
20mm (19.9mm) Bench Dog Set with Levers, Cams, Stops, etc
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.9mm set…
- Downloads
- 1,232
- Likes
- 439
- Rating
- 5
P
PrintablesMadeByAdam
Gridfinity Radius Measuring Set (2mm - 20mm)
A radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box. Notes: I didn't include 1 mm radius because honestly, I don't think it's really needed. The individual pieces default to being printed…
- Downloads
- 1,215
- Likes
- 509
- Rating
- 5
P
PrintablesChrisHerman
Pipe clamp / Conduit clamp 20mm, 22mm, 25mm
Cconduit / pipe snap-in clamp. single screw tested with 30% infill and 25mm conduit Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: no-name PVA white Category: DIY
- Downloads
- 1,181
- Likes
- 63
- Rating
- 5
P
PrintablesSunshine
3D print PCIE slot for 120mm Fan to replace fans on GPU
It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…
- Downloads
- 1,160
- Likes
- 121
- Rating
- 5
P
PrintablesNoctua_at
NA-FMA1 120/140mm Adaptor for Noctua 120mm fans
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
- Downloads
- 1,156
- Likes
- 458
- Rating
- 5
P
Printablesmirabatek
Modular Desk Fan 120mm (Optional Parkside X20V Mount)
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 120mm computer fan, this versatile device is perfect for keeping you cool or for fume extraction during soldering and…
- Downloads
- 1,098
- Likes
- 937
- Rating
- 4.93
P
PrintablesHuys
120mm Fan to 3in Duct Reducer
Mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. Mount holes to fan are size M4. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
- Downloads
- 1,094
- Likes
- 80
- Rating
- 5
P
PrintablesJake Reeves
Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…
- Downloads
- 1,066
- Likes
- 130
- Rating
- 4.92
P
PrintablesHD_Creator
Double D-ring buckle for 20mm strap webbing
Application The double D-ring buckle for strap webbing is not the fastest to close, or the easiest to open. But it is the strongest there is to my knowledge (see video at the bottom of this page). If you need a quicker or more convenient…
- Downloads
- 1,061
- Likes
- 127
- Rating
- 5
P
Printablesthenickdude
Espresso knock box (20mm dowel)
I remixed deLamorDesign's espresso knock box to change the dowel diameter from 0.75 inches to 20mm, and increased the box diameter from 100mm to 120mm. When slicing this I added a modifier region to set the infill percentage to 50% near…
- Downloads
- 1,060
- Likes
- 153
- Rating
- 4.86
P
PrintablesCorsair
Triple HDD cage for 120mm fans (infinirail and universal versions)
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
- Downloads
- 1,018
- Likes
- 405
- Rating
- 5
P
Printablesjq910
a normal XYZ 20mm calibration cube but with a city on the inside
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
- Downloads
- 990
- Likes
- 48
- Rating
- 5
P
Printablesjdriscoll
Solder Fume Extractor (120mm fan)
Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the…
- Downloads
- 986
- Likes
- 179
- Rating
- 5
P
PrintablesMrNeedlemouse
IKEA Platsa 120mm fan with filter
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
- Downloads
- 948
- Likes
- 370
- Rating
- 4.87
P
PrintablesRESTLESS DESIGN
120mm Honeycomb Fan Duct
This 2 piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out. Once the fan plate and fan duct are printed, they can be glued togehter. I used super glue, which works fine. You could…
- Downloads
- 919
- Likes
- 243
- Rating
- 5
P
PrintablesMonte
Prop 20mm Ammo
Prop 20mm aircraft ammunition with printed ‘brass’ shell and projectile. Very closely matches old Air Force M56 20mm ammunition. This is a two-part model with a shell and projectile. Projectile models include 3 or 4 color changes…
- Downloads
- 886
- Likes
- 98
- Rating
- 4.88
P
Printablessquirrelf3d
120mm fan grill
120mm fan grill 6mm thick, with 4mm clearance between fan and grill. Compatible with regular self tapping screws like used on computers ------ Support me on Patreon ! https://patreon.com/squirrelf3d or buy me a coffee…
- Downloads
- 871
- Likes
- 75
- Rating
- 5
P
PrintablesD Rogers
120mm Fan Duct
I needed a way to get some fumes out of my garage without opening the door all the way during the winter. I designed this duct to attach to a 120mm fan so I could attach some flexible ducting to it with a hose clamp. I opened the door…
- Downloads
- 854
- Likes
- 116
- Rating
- 5
P
PrintablesSweetPrints
HEPA + CHARCOAL FILTER / FUME EXTRACTOR - NOCTUA 120MM
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
- Downloads
- 853
- Likes
- 415
- Rating
- 4.8
P
PrintablesGustavo
PCI bracket for 120mm FAN
I needed to cool down my 2x10Gbe Ethernet card, NVMe drives and SAS card.
- Downloads
- 831
- Likes
- 344
- Rating
- 5
P
PrintablesByte Insight
120mm Fan Adapter for Sim Hub Wind Sim
This is a conversion for the Wind Ace Wind Simulation for Sim Hub that converts the back so it takes a 120mm fan. There is an adapter for the body so a fan can be fitted and then a rear flow guard for the back. I used the GDSTIME GDP1238…
- Downloads
- 827
- Likes
- 139
- Rating
- 4.5
P
Printablesbulbasaur0
Kirby Fume Extractor for 120mm Fan (remix)
I scaled up Chris Borge's fantastic Kirby fume extractor model to fit a 120mm fan! I modified the fan bay fit so no trimming should be required for a 120mm fan. Options are available for using screws or heat set inserts to secure the fan.…
- Downloads
- 814
- Likes
- 386
- Rating
- 4.77
P
PrintablesCabbitCastle
20mm (20.0mm) Bench Dog Set with Levers, Cams, Stops, etc
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 20.0mm set…
- Downloads
- 798
- Likes
- 213
- Rating
- 5
P
Printablesredaeq
Sohle, Einlegesohle, Schuh Erhöhung / Insole, shoe elevation 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
- Downloads
- 771
- Likes
- 50
- Rating
- 4
P
PrintablesAlex
120mm fan to 100mm duct with twist lock connection
I wanted to be able to quickly connect and disconnect my 100mm duct to the 120mm fan of my engraving housing so I created this twist lock connection set . duct for 120mm fan 100mm duct hose (with a notch for optional attachement of a zip…
- Downloads
- 768
- Likes
- 130
- Rating
- 4.75
P
PrintablesMyTechFun
Dice as 20mm XYZ calibration cube
I very often use an XYZ calibration cube, but after checking the surface and measuring the dimensions, it became a waste. So from now on I will use this D6 dice as a calibration cube. Figure 6 is Z-shaped, the X-axis is 5 and the Y-axis…
- Downloads
- 758
- Likes
- 65
- Rating
- 4.6
P
PrintablesZenmaster33
Fan Grill / Cover (120mm & 60mm)
I made two fan grills for my Lack Enclosure, one for a 60mm Noctua NF-A6x25 PWM and the other one for a 120 mm Noctua NF-P12 redux-1700 PWM. Those will probably fit most 120mm and 60mm Fans
- Downloads
- 758
- Likes
- 45
- Rating
- 5
P
PrintablesDev6
120mm to 140mm Fan Adapter
I designed this Adapter to Mount a 140mm Radiator on a 120mm Mount. I can also be used to Mount an 120mm Fan on a 140mm mount. Made an Test_ Piece as request. Instructions .2 mm Layer Height .8 mm Shell Thickness .6 Bottom/Top Thickness…
- Downloads
- 732
- Likes
- 33
- Rating
- 5
P
PrintablesTom Greble
Flashforge Adventurer 5M Pro Back Panel w/ 120mm fan grill
------ UPDATE Apr 2024 There's a great remix of this model by @shreid_521169 with improved air circulation and a few other adjustments, I recommend checking it out here:…
- Downloads
- 731
- Likes
- 223
- Rating
- 5
P
PrintablesOpenBuilds
OpenBuilds V-Slot Gantry Plate 20mm
Put some motion in your build with a precision milled gantry plate designed for any 20mm side of V-Slot Linear Rail.
- Downloads
- 713
- Likes
- 40
- Rating
- 0
P
PrintablesSupahobnobba
Lian Li O11 XL - 120mm Fan Duct
On the right side of the Lian Li 011 XL, there is a spot for 3x 120mm fans. After initially assembling, I noticed that all of the wires ran through this location and blocked a lot of airflow. I created this fan duct to almost make contact…
- Downloads
- 704
- Likes
- 100
- Rating
- 5
P
PrintablesHobo4ssassin
120mm Fan Louver
Louvers, for a 120mm fan. Print 6 blades flat side down. Keep the heat where you want it.
- Downloads
- 695
- Likes
- 117
- Rating
- 5
P
PrintablesDanAndersen
angled fan shroud for 120mm 12cm fans to silence and redirect air flow
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
- Downloads
- 677
- Likes
- 65
- Rating
- 4.5
P
PrintablesMaschinist RaumZeitPiraten
UPDATE Iris ~120mm for Stepper
Update nov 2025: The spacers were a bit too short, which may have caused the lamellas to be slightly too squashed. I apologize for that. The new spacers should work better. Ideally, secure them with self-locking nuts and perhaps don't…
- Downloads
- 664
- Likes
- 142
- Rating
- 4
P
PrintablesRESTLESS DESIGN
120mm Honeycomb Fan Grill
A simple yet functional honeycomb fan grill for 120mm fans. Can be attached using screws or zip ties (if you don't mind ghetto mounting solutions ;) ). Support If you'd like to support me for the 3D models I distribute for free, you can…
- Downloads
- 658
- Likes
- 107
- Rating
- 5
P
PrintablesFantasial
120mm Fan Grill Template
I designed a 120mm fan grill template 2 months ago because there were no good options available for free. The fan grill is just a template, so hopefully people can use this to make some cool fan grills. The design is also CC0 so do…
- Downloads
- 652
- Likes
- 31
- Rating
- 5
P
PrintablesMakingMyThings
120mm fan ice crystals
My daughter was showing me something similar on Etsy that she wanted for her new PC build, so I decided to make an attempt in Blender with geometry nodes and such before buying the premade version. Here's the original Etsy:…
- Downloads
- 652
- Likes
- 57
- Rating
- 0
P
PrintablesIPIND 3D
120mm Adjustable Fan Vent
I am building a print enclosure and wanted the ability to close off the extractor fan hole to retain as much heat as possible when the fan is not being used. I found the original design by @Edezigns:…
- Downloads
- 650
- Likes
- 117
- Rating
- 5
P
PrintablesCostum 3d
Angled 120mm PC Fan Mount – V1
With this adapter, 120 mm PC fans can be mounted at a 10° angle inside the case. The adapters can be connected via a clamping mechanism, allowing you to chain together virtually any number of fans. To mount one fan with an adapter in the…
- Downloads
- 634
- Likes
- 51
- Rating
- 5
P
PrintablesCode and Make
Tower Pro MG946R (55g) Servo Arm Disk Horn Round Mount (20mm)
20mm disk mount for Tower Pro MG946R servo. Disk diameter: 20mm Disk thickness: 2mm Center hole diameter: 3mm Outer hole diameter (with holes version): 1.5mm Outer hole distance from center (with holes version): 8mm They should be a tight…
- Downloads
- 626
- Likes
- 25
- Rating
- 5
P
PrintablesThomas
Calibration Cube Print Test 20mm XYZ
A simple 20mm calibration cube designed to test dimensional accuracy on the X, Y, and Z axes. Perfect for quick printer tuning and checking your machine’s precision. Easy to print with no supports needed.
- Downloads
- 619
- Likes
- 16
- Rating
- 5
P
Printablesmmst
20mm Cube Würfel Kalibrieren Calibration
STEP und 3MF zum Drucken oder Veränderung STEP and 3MF to print or to change
- Downloads
- 617
- Likes
- 7
- Rating
- 4
P
PrintablesYeeve
120mm Computer Fan- 4in Duct Exhaust
Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.
- Downloads
- 608
- Likes
- 82
- Rating
- 5
P
PrintablesPascal
120mm Fan Filter Holder
Für TOOLCRAFT 79-7202 Aktivkohlefilter (L x B x H) 120 x 120 x 10 mm ( https://www.conrad.at/de/p/toolcraft-79-7202-aktivkohlefilter-l-x-b-x-h-120-x-120-x-10-mm-2283829.html )
- Downloads
- 607
- Likes
- 96
- Rating
- 5
P
Printableszayigo
20mm PVC pipe clip
Wall mount clip for 20mm external diameter PVC pipes commonly used as a wire conduit Print: No supports Increase wall count (4) for increased rigidity Remix of " pipe clip M25 / Rohrklemme " by FLXKM on Thingiverse
- Downloads
- 604
- Likes
- 68
- Rating
- 4.83