Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Perforated sponge holders that straddle the centre of a double sink - Available in SINGLE or DOUBLE sided versions
- Rating
- 4.917 / 5
- Likes
- 130
- Downloads
- 1,066
- Makes
- 12
- Views
- 2,926
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up.
This was designed to straddle the ~32mm wide divider running down the middle of my (fairly standard) double sink.
I have provided files for SINGLE and DOUBLE-SIDED versions, each with either a loose (20mm) or tight (15mm) sponge pinch. My preference is for the single-sided, tight pinch, but depending on your setup + sponge, choose what's best for you!
Print Settings:
I printed mine in PETG with 3+ perimeters, 0.3mm layer height and 20%+ infill. The print shouldn't require support material if printed on its side (see .3mf files).
Warning:
Use at your own discretion, and please err on the side of safety. I will not be responsible for any harm that comes from the use, misuse or breaking of the device.
Enjoy! And please post pictures of your makes!