Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perforated sponge holders that straddle the centre of a double sink - Available in SINGLE or DOUBLE sided versions
- Ocena
- 4,917 / 5
- Polubienia
- 130
- Pobrania
- 1066
- Wydruki
- 12
- Wyświetlenia
- 2926
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up.
This was designed to straddle the ~32mm wide divider running down the middle of my (fairly standard) double sink.
I have provided files for SINGLE and DOUBLE-SIDED versions, each with either a loose (20mm) or tight (15mm) sponge pinch. My preference is for the single-sided, tight pinch, but depending on your setup + sponge, choose what's best for you!
Print Settings:
I printed mine in PETG with 3+ perimeters, 0.3mm layer height and 20%+ infill. The print shouldn't require support material if printed on its side (see .3mf files).
Warning:
Use at your own discretion, and please err on the side of safety. I will not be responsible for any harm that comes from the use, misuse or breaking of the device.
Enjoy! And please post pictures of your makes!