1 / 3
Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets) — zdjęcie 1
1 / 3

Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,51 € – 4,29 € netto (bez VAT)

Dla pliku: brush-holder-6x3-magnets.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,90 € netto (środek widełek).

Masa podana przez autora
55 g
Czas druku podany przez autora
3,6 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Remix of the Removable Nozzle Brush with Removable Purge Bucket, to go back to the original 6x3 magnets

Ocena
5 / 5
Polubienia
26
Pobrania
164
Wydruki
2
Wyświetlenia
1284
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff. 

Refer to the original for GCode and instructions!

I printed mine in PLA because I don't have my panels on yet to do other materials, and I used supports for the “bucket” model. The other two do not need supports.

Tagi