Ender 3 V3 KE and SE automatic nozzle cleaning brush PROCEDURE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Gcode for the projet
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature
G28 ;Home all axes
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temperature
G1 X1 Y-18 Z3 F5000.0 ;Align with brush
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temperature to stabilize
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temperature to stabilize
; Set and wait for nozzle to reach 225°C
M104 S225 ;Set nozzle temperature to 225°C
M109 S225 ;Wait for nozzle to reach 225°C
; Perform back-and-forth cleaning movements
G1 X90 Y-18 Z3 F5000.0 ;First forward pass
G1 Z0 F300 ;Lower nozzle by 3 mm after the first pass
G1 X30 Y-18 Z0 F5000.0 ;First backward pass
G1 X90 Y-18 Z0 F5000.0 ;Second forward pass
G1 X30 Y-18 Z0 F5000.0 ;Second backward pass
G1 X90 Y-18 Z0 F5000.0 ;Third forward pass
G1 X30 Y-18 Z0 F5000.0 ;Third backward pass
G1 X90 Y-18 Z0 F5000.0 ;Fourth forward pass
G1 X30 Y-18 Z0 F5000.0 ;Fourth backward pass
G1 X90 Y-18 Z0 F5000.0 ;Fifth forward pass
G1 X30 Y-18 Z0 F5000.0 ;Fifth backward pass
G1 X90 Y-18 Z0 F5000.0 ;Sixth forward pass
G1 Z3 F300 ;Raise nozzle by 3 mm after the last backward pass
G1 X30 Y-18 Z3 F5000.0 ;Sixth backward pass
; Final movement
G1 X40 Y-18 Z15 F5000.0 ;Raise nozzle to clear the brush