Ender 3 V3 KE and SE automatic nozzle cleaning brush PROCEDURE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed Gcode for the projet
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 88
- Makes
- 0
- Views
- 1,045
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature
G28 ;Home all axes
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temperature
G1 X1 Y-18 Z3 F5000.0 ;Align with brush
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temperature to stabilize
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temperature to stabilize
; Set and wait for nozzle to reach 225°C
M104 S225 ;Set nozzle temperature to 225°C
M109 S225 ;Wait for nozzle to reach 225°C
; Perform back-and-forth cleaning movements
G1 X90 Y-18 Z3 F5000.0 ;First forward pass
G1 Z0 F300 ;Lower nozzle by 3 mm after the first pass
G1 X30 Y-18 Z0 F5000.0 ;First backward pass
G1 X90 Y-18 Z0 F5000.0 ;Second forward pass
G1 X30 Y-18 Z0 F5000.0 ;Second backward pass
G1 X90 Y-18 Z0 F5000.0 ;Third forward pass
G1 X30 Y-18 Z0 F5000.0 ;Third backward pass
G1 X90 Y-18 Z0 F5000.0 ;Fourth forward pass
G1 X30 Y-18 Z0 F5000.0 ;Fourth backward pass
G1 X90 Y-18 Z0 F5000.0 ;Fifth forward pass
G1 X30 Y-18 Z0 F5000.0 ;Fifth backward pass
G1 X90 Y-18 Z0 F5000.0 ;Sixth forward pass
G1 Z3 F300 ;Raise nozzle by 3 mm after the last backward pass
G1 X30 Y-18 Z3 F5000.0 ;Sixth backward pass
; Final movement
G1 X40 Y-18 Z15 F5000.0 ;Raise nozzle to clear the brush