Creality K1C Silicone Nozzle Cleaner Mod Easy Bed Plate Swap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds in place the silicone brush allowing to easly swap plate.
- Ocena
- 4,92 / 5
- Polubienia
- 1131
- Pobrania
- 6365
- Wydruki
- 50
- Wyświetlenia
- 31 303
- Oceny
- 50
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NO software modification are required if you have a K1C
Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws.
Now you can use whatever plate you want.
I have included a brush mold model so that you can make the brush yourself with some silicone.
IF YOU HAVE K1 / K1 Max:
I found out that on my K1C:
the actual movement algorithm is stored as
"clear_nozzle()" [into prtouch.py] called by
"cmd_NOZZLE_CLEAR()" [into prtouch.py] called by
"cmd_CX_NOZZLE_CLEAR()" [into custom_macro.py].
Finally CX_NOZZLE_CLEAR is used into gcode_macro.cfg to achive the goal: it is used in START_PRINT macro as you can see in the picture.
K1 k1c and k1max share the same firmware so I think that if you own a k1 or a k1max and your firmware is updated to the last version you have all what you need to run the CX_NOZZLE_CLEAR routine.
PROBABLY you can do the cleaning by modifying your START_PRINT macro [into gcode_macro.cfg] adding CX_NOZZLE_CLEAR like in the k1c file (picture).
I don't know if it will work.
If you decide to try it let us know.
