Flashforge AD5X Bento Box filter Fan Duct/Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found the original model just touched the print bed in my AD5X , it should not have.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 100
- Wydruki
- 2
- Wyświetlenia
- 1402
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was building a BENTO box filter for my AD5x and discovered the print bed would clip the bento box with the original FlashForge Adventure 5M BentoBox Fan Duct. It is strange this occurred as the 5M and AD5x should have identical enclosures .
So I moded the fan duct to move it 2.1 MM closer to the enclosure wall which now means the Bento Box clears the print bed. I also slotted the screw holes to add a bit of wiggle ability for fine adjustment of the location.
Add a slot in the bottom back corner for wiring if need.
Add a version to suit the more common (On aliexpress cheapo kits) 4.3 OD M3 brass heat inserts. I found the 5mm OD brass inserts a little less common and more expensive.
Included STEP file for others to mod if needed.