Ender 3 Fan Duct "Red Squirrel" remix & Direct Drive Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the Red Squirrel fan duct to fit my needs : adjusted holes diameter to fit M3 screws better made the 5015 fan…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 173
- Wydruki
- 4
- Wyświetlenia
- 2125
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Modified the Red Squirrel fan duct to fit my needs :
- adjusted holes diameter to fit M3 screws better
- made the 5015 fan holding arm and clamp thing beefier to not break when screwed
- removed the top cable guide
- added a bltouch mount
See the picture, it's pretty compact and tidy :)
On the picture I'm using a DIY aluminum bracket for the direct drive, but the 3D printable one provided here works well, I used it before.
Using M3 screws everywhere screws are needed, this the original Red Squirrel page for assembly instructions.
I advise this extruder motor : https://fr.aliexpress.com/item/32768043304.html
and the mini BMG by trianglelab : https://fr.aliexpress.com/item/33029933418.html
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: n/a PETG
Category: 3D Printer Accessories