1 / 4
FANG OEM 40mm Duct Phaetus Dragonfly BMS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan duct for the FANG OEM part cooling duct that works with the Phaetus Dragonfly BMS
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1034
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same.
I've added some vanes to straighten the air flow and improve cooling.
Both 0.4mm and 0.6mm nozzles should work fine for this print (printed mine with 0.6). Use PETG or other material with good heat resistance as this is will be touching the heat sink.