Liczymy pasujące modele…
This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board. The components shown were printed in PLA+ for prototyping, though the final version of the main…
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
I made some modifications to the top piece to make it fit the Y-axis plate of the Cr10S Pro V2. It will most likely also fit the V1, but I can't test that. The bottom piece remains the same as in the original model.
After years of experimentation, calibration, trial-and-error, and countless hours of printing, I’m finally sharing what I consider the Best of the Best CR10SE profile . This profile has been carefully developed and extensively tested to…
When upgrading my CR10s, I realized E3D didn't provide parts that would support my specific printer. If you have also added a BL Touch, you might end up in the same situation when upgrading to a Hemera. The printed part for the older…
Latest Update on 10/18/24: For latest profile use - Folder: ORCA Profile Creality CR 10 SE_Enhanced_10_18_24. Check out Screenshots for performance results. I have created and extensively tested these profiles. It has given great results…
Tool holder for the CR10s or any printer with 20x20 rails with 6mm slots. Gives you the place to leave your tools at your printer. Allen keys: 5mm, 4mm, 3mm, 2mm, 1.5mm Flathead screwdriver and the three spanners Category: 3D Printer…
Remix of the shell component only for the original "Spool Holder CR10S-Pro 608-Bearing." Shell has chamfered ends to keep filament spools from sliding off. Use all other original files provided by the original author.
Bonjour, Voici ma version personnalisé d'un guide filament supérieur pour CR10S PRO V1 et V2. J'ai pris pour base le guide filament de @Sharklade ==> https://www.thingiverse.com/thing:4100856 Lors de ma première version, j'ai dû chauffer…
onjour, Voici ma version de guide filament inférieur (entrée détecteur filament). En photos les étapes d'assemblage. Vous aurez besoin d'un galet à roulement comme celui-ci : (Type C avec roulement) https://a.aliexpress.com/_TwQWh…
Bonjour, Voici un support personnalisé pour la caméra Yi Home 1080p. Il permet la fixation de la caméra directement sur le plateau sans utilisé de quincaillerie supplémentaire. Fixation sur la vis d'origine du clip de maintient du…
Bonjour, Depuis mon passage en Direct Drive avec extrudeur style BMG je n'avais plus la possibilité d'utiliser mon capteur de fin de filament. Avec cet adaptateur le problème est résolu. L'imprimante garde donc sa fonctionnalité et reste…
=>MERCI DE BIEN LIRE LES MISES A JOUR SVP<= Bonjour, Je vous propose ici mon pack silence pour CR10S PRO V2 (n'ayant pas testé le montage sur la V1 je ne garantis pas la compatibilité au niveau du capteur de plateau). Toutes les…
Bonjour, Voici la version de ma tête d'impression "Quiet pack" sans Direct-Drive. Vous aurez la possibilité de réduire votre ventilation de 30 à 50% pour un silence agréable sur votre CR10S PRO V2 (pas testé sur la V1). Il vous faut…
Bonjour, Voici ma tête d'impression direct-drive pour CR10S PRO V2. Montage hotend type V6 full métal en cuivre ! La description complète et les instructions d'achat hardware et de montage sont dans le PDF téléchargeable (instructions in…
Bonjour, Voici un support pour caméra Yi Home. Vous pourrez surveiller vos impressions tout du long de se monter sur l'axe Z. Se fixe simplement sur l'axe de galet. Pensez à vous abonner à mon compte pour être au courant de mes nouveaux…
Bonjour, Voici ma version réalisée à partir de la base fournie par @Black-raiser (merci à lui) de refroidissement de la carte mère. Ici pas besoin d'entretoise, et une taille réduite au strict nécessaire. Vous pouvez facilement y…
CR10S Pro Tool holder which holds all the tools and usb key and sd cards. Remix of a remix...
I had problem with falling the spool out of the holder. So i made this one mini upgrade. https://www.thingiverse.com/thing:6888709 https://cults3d.com/en/3d-model/tool/cr10s-pro-spool-holder-upgrade
I designed this to hold all of the original parts with the E3D Volcano. You will need a separate mount like the one below. I know we could 3D print one, but I wanted a metal mount and ordered…
I made cleaning brush holder for the cr10s pro. It was print from PETG. You can adjust the adapter for the brush. I use this one https://www.unihobby.cz/kartac-na-svicky-150x15mm Video G-Code Main code – add to your config.cfg klipper…
This is a fan duct for a CR10s Pro using the MicroSwiss DirectDrive and AllMetalHotend to mount two 4010 radial and one 4010 axial fan while keeping the stock position of the stock probe! The model was a request made on my discord server,…
Here is a real quick stand for holding a Wyze Cam Camera. Installation is easy and flexible. The base just slips between the tabletop and the bottom of the CR10s PRO printer. You can position it anywhere that works for you, and it can be…
This Model is perfect for the use of your CR10S inside a housing, if you havn't enough space for it. I designed it to screw it into the holes of the rubber feet, with the original screws. In the best case you use a cable extension, to be…
I created this for my CR10s but it can be used on most v-slot based 3D printers. You will need standard squash balls (2 dots) and glue if you want them to stay in place. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No…
THIS IS A WORK IN PROGRESS!!! All feedback is welcomed. I wanted to create a much more slimline fan duct for my cr10s and ender 3 that is compatible with stock hot end shroud. I have only test print the part on a resin printer please…
This mount shifts the creality mainboard away from the side of the case so you can route the USB cable internally on a CR10S Pro and Pro V2. It could be used to connect it to Raspberry Pi for an Octoprint server or a Klipper conversion. A…
This model allows you to remove the screen on the CR10S Pro and Pro V2 and blank off the hole. On the back it has mounting bosses for a Raspberry Pi Zero. The FreeCAD file used to create it is included. To change the mounting holes, edit…
Tool holder for the CR10s or any printer with 20x20 rails with 6mm slots. Gives you the place to leave your tools at your printer. Allen keys: 5mm, 4mm, 3mm, 2mm, 1.5mm Flathead screwdriver and the three spanners Category: 3D Printer…
This is a bottom bracket for the CR10S Pro variants that allows you to twist the ribbon cable 90 degrees so it does not take up that much space. The printer should have come like this from the factory! I tried to make it with a bit of…
Please refer to updated design here (found glitch with X-axis end stop with initial version hence updated) Re-make and modified version to include/update for: 1 - BLTouch (for auto bed levelling - fine tuning) 2 - Dial Indicator holder…
This covers the void left by removing the touchscreen while providing some ventilation.
This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board. The components shown were printed in PLA+ for prototyping, though the final version of the main…
I printed this with my old broken hotend mount which I put a screw through by drilling into it.
What you are seeing is my desire to make sure my dual z axis is leveled every time. I use a Lerdge controller with separate Z steppers, which made this much easier to maintain leveling between each side every time. Hardware includes: 4 x…
This is a new model, I have all the designs for it in Tinkercad and have released it for free for anybody requiring a removable side bin for a Creality CR10 se printer. The bracket needs to be printer with supports currently, I will look…
Allows you to mount a traditional BTT 12864 LCD to a CR10s Pro's original LCD location. You will need some double sided tape and M3 heatset inserts. Inserts to mount the LCD to the adapter, and double sided tape to mount to the CR10s Pro.…
Basically, an adapter board to fit a BTT SKR Pico in a CR10s Pro using the original mounting points. Gave up on trying to use the hole for USB, it's all via an internal Orange Pi Zero 3 now and Wi-Fi.
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
Cr10s pro v2 conversion to Skr Mini E3v3 board. BOM 5 x M3 heat inserts 4.5/5mm width
This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…
Properly over-engineered CR10S Pro motherboard cooling fan mount. You will need some additional M4 hardware: 2x M3x10 bolts 4x M3 washers 4x M3x30 bolts Washers are supposed to fit underneath the bolts used to screw the part to the…
🔧 What’s changed / new: Adapted Jammy’s CR10SE C920 mount to support the Tapo C100/C110 camera instead of the Logitech C920.
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
Full video guide for the conversion can be found here: This conversion only includes the x and z axis, not the y axis. Files needed to convert the y-axis can be found here:…
I made some modifications to the top piece to make it fit the Y-axis plate of the Cr10S Pro V2. It will most likely also fit the V1, but I can't test that. The bottom piece remains the same as in the original model.
I bought 2x 500mm linear guides MGN12H. And made a model of Y axis with profile 2020 and Y base plate and spacers wich are important for upgrade. You can use 500mm or cut them same length of 2020 profile. I made parts from aluminium but…
These adapters allow you to offset the limit of the zaxis. Simply measure the thickness of the material you are attempting to burn/etch and use the appropriate adapter/spacer to ensure you doo not crash into the material. Print Settings…
This isn´t my own model it´s remixed for better fit on my CR10s PRO V2 Fan duct was mounted too low and the exhaust was too long so it was hitting my prints and ruining one of them after it snapper after the drag on printed layers so this…
After years of experimentation, calibration, trial-and-error, and countless hours of printing, I’m finally sharing what I consider the Best of the Best CR10SE profile . This profile has been carefully developed and extensively tested to…
Simple design of a light arm to turn an LED bar towards the printing plate. This design avoids the creation of shadows on the print from the hotend. It fits perfectly with the model I ordered on amazon , but can also be used with other…
This is the control box for my CR10s All In One project. The control box houses the BTT SKR Mini E3 v2 along with a Raspberry Pi. I converted my CR10s from 12v to 24v. I design this case and the power supply to not need any supports. You…
This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S. There is a more recent version at the following link: https://www.thingiverse.com/thing:3259429 In this remix I have: 1.Sculpted the component…
Yet another CR10 remix for the CR10\CR10S Control Box. This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased…
Ender 3 CR10S Multi Direct Drive Extruder with Tool Free Adjustment This thing is more about creating a flexible Direct Drive extruder assembly which allows for relatively easy swapping out of extruder head types and hot end maintenance…
IMPORTANT UPDATE\NOTICE: Having spent a lot of time, effort and probably twice the price of a Nimble I still cannot get this to work effectively due to the flexing of the core considerably negating the applied retraction. I am therefore…
Update:19\06\20 Uploaded Step File. Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link:…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:16_01_20 Uploaded…
Please note this is not compatible with the new CR10 V2 version This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S 1.This is primarily a cosmetic remix which includes larger and more fluent radii…
when i order my micro swiss for my cr10spro v2 i order the cooling block of Cr10 by mistake and its a bit shorter like the ender 3 is so i end up printing the Bltouch satsana shroud for a ender 3 but it have a 10mm fan for the part…
Needed a direct drive solution. printed in petg 100% infill needs suports
These riser will lift your Cr10s pro approximately 145mm. I've printed them on my coreone+ with 0,2 Layer hight in PETG Credit for the CR10s pro Model: https://www.thingiverse.com/Captain_Falafel/designs
Hero Me Gen 7 Gantry Adapter for CR10S I modified it to snap in and provide more support If your like this model consider buying me a coffee? https://buymeacoffee.com/jonathanseffinga
This is fan duct for creality printer CR10S Pro V2. I guess it will be working even for other printers which has similar hotend. It's used to replace the noisy creality fan with the noctua fan. Thanks to the fan duct the air from the fan…
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well). Just use this adapter to connect stock X-carriage plate and the SB assembly. The…
Remixed k1nb0te‘s cable chain carriage part with a filament tube support from Portzal's Hotend Cable Keeper. (works on Creality stock hotend) Also tightened carriage's mounting tolerance a little bit; cut a corner in order to avoid…
Update 2020/05/05 There was a small bug on the original Gen4 ABL mount, that the gantry won't hit the X limits switch. A revised version is updated to fix this issue: Gen4_Stock_ABL_mount_for_dual_5015_Duct_M12_fixed.STL If you have…
This mod is to be able to use 100% of the standard printers reachable area(350x350x350mm) for printing using an easy to find bed. The bed used is a Creality cr-10s 410x410mm. Moving extrusions: Place the 405mm long 2020 extrusions like in…
Have made the switch to Klipper, wanted to make use automatic resonance measurement which requires mounting an accelerometer to the printer. Hopefully this is rigid enough (I printed it in PETG but probably should have printed it in PLA.…
Nozzle Cam for the CR10S Pro V2 - It should fit on anything that has the same fan shroud. Camera module itself can be found here https://www.aliexpress.com/item/32832909804.html Print Settings Printer Brand: Creality Printer: CR-10S…
J-HotEnd (OD 22.3 mm) mount for Creality printers such as Cr10/CR10S and most likely all other printers with common X carriage plate. Attached - all STL files and for a convenience same files in 3MF format. PLEASE READ design…
This is a re-creation of the stock hotend fan shroud on the Creality CR10s PRO. I found the stock 40x10mm 24v hotend fan is pretty loud, but replacing this with a 12v Noctua 40x10mm fan may not provide enough airflow. I wanted to use a…
I found the idea of a USB plug protection appealing, but the designs were not easy to print or need sticky tape for fixing which, over time, might come off. So I decided to do my own design. This design features: Snap on assembly (no…
Spool holder for frictionless spool rolling. use with 608 Bearings Category: 3D Printer Parts
Part fan from remix. Added slightly bigger holes so my 3mm screws would fit. Also made it adjustable in height to get closer to the tip of the nozzle. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
The original EZABL mount did not leave enough threads on the 18mm EZABL pro sensor to allow me to adjust for the 2mm height distance from the tip of the extruder nozzle. I created the attached file from scratch to accommodate my problem.…
Third part of my Crusa mod to go with the MK3s extruder on the Cr10s Pro. Find my Mk3s adapter here: https://www.thingiverse.com/thing:4151703 I rearranged the breakout board for easier access, with a hinged door for protection. In the…
This is my adapter plate to use an Prusa Mk3s on my Cr10s Pro. I chose to adapt this extruder because I know there is a lot of great options around to upgrade it to almost anything you want including future evolution of its design…
Easy to print, just slide the cable inside and then insert it in the rubber washer. Zip tie it and it's ready to go. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament:…
I just cut two 45 degrees chamfer at the top and bottom of the original model so it can be printed easily face down with no support. This lcd is a great easy mod for your Cr10s pro so you can access all the missing settings. I included a…
This is a 7.4 to 8.4 gage to set your inductive sensor heights when upgrading your CR10s Pro if you have a steel or flex plate bed. This gage have multiple steps with 0.1mm increments so it's obviously best to print it at 0.1 or less. I…
This is a Tab and back stop addition to the bed to make it easier removing and positioning the wham Bam magnetic bed. It must be printed out of high temperature material like ABS or PETG to survive the heated bed. You will need 6x16mm M3…
I was getting tired of the bowden tube working itslef loose from the hot end on my Creality CR10S Pro so I designed this stabilizer that snaps into place without any need for screws. Note that i made a slot to push a zip-tie thru to…
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
Hi, Another base holder that can be used with : https://www.thingiverse.com/thing:2842300 This one slides on the side base. 1 is very snug, needs a little sanding. 2 is little bit less snug, but still snug Both work great. If you use the…
Hi, Saw something like this for logitech camera on thingiverse. But i have a pi camera, so thought, let's do a little remix. It's a z-axis mounted part, it fits very snug, (need to edit again maybe) but with a little sanding on the parts…
This is a filament guide for the Creality CR-10s Pro and Max printers. This print uses Skateboard Bearings, they should be the following (or equal specs): https://amzn.to/3a5lMvb These are constructed in a way so they do not need any…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
..first thks to ToddsWorld for the great design... I was using his design for all my stock CR-10s Pro, but when I started to add z-syn or even frame bracing, I needed to alter the design and finally decided to do a complete makeover.…
The bracket for the stock NEMA17 extruder motor is a perfect place for a drag chain mount to route back the extruder/hotend/x-stepper|limit switch cabling back to the control board. Bill of Materials 6x M3 threaded inserts 6x M3x6 button…
Description I upgraded my heatbed to use a silicon heater pad, and wanted to be able to easily attach/detach the heatbed and add a thermal fuse. I've used Wego221 lever nuts to make life easier. This mod will also work for folks with the…
When upgrading my CR10s, I realized E3D didn't provide parts that would support my specific printer. If you have also added a BL Touch, you might end up in the same situation when upgrading to a Hemera. The printed part for the older…
This is a simple fan shroud to convert the Creality CR10Spro to a microswiss (clone) hotend. Designed to fit two 4010 radial fans for part cooling and a 40mm axial fan for hotend cooling. Print with the backside down with support under…
Custom mounting plate for the Omniadrop Extruder from Dropeffect for my CR10SPro (V1) Fits right onto the X carriage. print facing extruder side down (hex pockets up) no support needed simply drill open the holes after printing three M3…
This is a remix of my Mounting Plate for the CR10SPro to fit a Drag Chain 20x10 R2 for the X axis. There are 2 versions for the adapter to the chain: - One for M3 Nuts - one for M3 Inserts. The fixed end of the chain mounts to the two top…
