1 / 10
microswiss-direct-drive-cr10s-pro-v2-fan-shroud - m3 heat set inserts, light delete, eddy duo remix. — zdjęcie 1
1 / 10

microswiss-direct-drive-cr10s-pro-v2-fan-shroud - m3 heat set inserts, light delete, eddy duo remix.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

cr10s Micro Swiss fan shroud upgrade. Eddy Duo, light delete, Ruthex Heat set inserts

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
266
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board.

The components shown were printed in PLA+ for prototyping, though the final version of the main shroud will be printed in glass-filled ABS for improved thermal and mechanical performance. The fan shroud print was paused at layer 13, with 30% infill selected to maximize internal surface area for bonding. A fan filter—sized to fully cover the intake opening—was affixed using super glue. A fine mist of water was applied to accelerate curing. As the CA glue cures to a bright white residue, any visible excess was concealed using a black permanent marker to maintain visual uniformity.

Tagi