1 / 7
CR10/CR10S Extruder Motor Drag Chain Mount — zdjęcie 1
1 / 7

CR10/CR10S Extruder Motor Drag Chain Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For CR10/CR10S printers which have been upgrade to a direct drive extruder.

Ocena
0 / 5
Polubienia
6
Pobrania
48
Wydruki
0
Wyświetlenia
654
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The bracket for the stock NEMA17 extruder motor is a perfect place for a drag chain mount to route back the extruder/hotend/x-stepper|limit switch cabling back to the control board. 

Bill of Materials

6x M3 threaded inserts

6x M3x6 button head screws

Tagi