CR10S-PRO Prusa Slicer profile PLA/TPU/PETG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1.
- Ocena
- 4,941 / 5
- Polubienia
- 174
- Pobrania
- 2736
- Wydruki
- 21
- Wyświetlenia
- 16 036
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1.
I tweaked the profile with a few test prints, and i find the results better than Cura.
It should be a good starting point for anyone trying to move to Prusa Slicer.
Profile for PLA. Can be used for TPU with 40mm/s speeds.
For PETG, temperature needs to be changed to 240 and cooling fan to 0.
Moai STL uploaded to be able to post the config
Happy printing!
Link to article: https://3dprintbeginner.com/cr10s-pro-prusa-slicer-profile/
Print instructions
Unassociated tags: Prusa Slicer
Category: 3D Printing