CR10S-PRO Prusa Slicer profile PLA/TPU/PETG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1.
- Rating
- 4.941 / 5
- Likes
- 174
- Downloads
- 2,736
- Makes
- 21
- Views
- 16,036
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1.
I tweaked the profile with a few test prints, and i find the results better than Cura.
It should be a good starting point for anyone trying to move to Prusa Slicer.
Profile for PLA. Can be used for TPU with 40mm/s speeds.
For PETG, temperature needs to be changed to 240 and cooling fan to 0.
Moai STL uploaded to be able to post the config
Happy printing!
Link to article: https://3dprintbeginner.com/cr10s-pro-prusa-slicer-profile/
Print instructions
Unassociated tags: Prusa Slicer
Category: 3D Printing