CR10S Pro VORON Stealthburner Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage…
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 3317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well).
Just use this adapter to connect stock X-carriage plate and the SB assembly. The adapter is designed for using LJ12A3-4-Z/BX as ABL (or any other M12 cylinder sensor).
Some M3 screws will be used. If you are assembling a VORON SB toolhead then you should have plenty of spares for them.
After installation, you need to set probe offset X29, using G-code as following:
M851 X29
M500
Offset your nozzle Y-28 by adding a line in printer's starting G-code right after G28 and G29 lines:
G28 X0 Y0 ;Home
G29 ;Auto bed Level
G92 Y-29 E0 ;Reset Extruder
Of course you can also do both offsets in the firmware configuration.
Print guide:
Lay down to the print bed, no support needed
Category: 3D Printer Parts