CR10S Pro VORON Stealthburner Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage…
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 212
- Makes
- 0
- Views
- 3,319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well).
Just use this adapter to connect stock X-carriage plate and the SB assembly. The adapter is designed for using LJ12A3-4-Z/BX as ABL (or any other M12 cylinder sensor).
Some M3 screws will be used. If you are assembling a VORON SB toolhead then you should have plenty of spares for them.
After installation, you need to set probe offset X29, using G-code as following:
M851 X29
M500
Offset your nozzle Y-28 by adding a line in printer's starting G-code right after G28 and G29 lines:
G28 X0 Y0 ;Home
G29 ;Auto bed Level
G92 Y-29 E0 ;Reset Extruder
Of course you can also do both offsets in the firmware configuration.
Print guide:
Lay down to the print bed, no support needed
Category: 3D Printer Parts