186 models
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
A wheel with a holder to line up the filament correctly, 21cm diameter ball bearings
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
Latest Update on 10/18/24: For latest profile use - Folder: ORCA Profile Creality CR 10 SE_Enhanced_10_18_24. Check out Screenshots for performance results. I have created and extensively tested these profiles. It has given great results…
Filament guide for Creality CR-10 Max / CR10s-Pro. Prints in one part, no supports, no extra parts, press fit. Updated version adds opening at the tip of the guide for easier feeding and pushing of filament into filament sensor and bowden…
This is a 2 parts quick print to attach a Spool on top of the Creality CR 10 ptiner. Use the provided steel bracket as part of the assembly. The print of each part takes About 30 to 40 minutes. Category: 3D Printer Parts
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
Update I thought I could increase the airflow a bit more, allowing it to focus even better by cutting out a bit more material. There are two additional versions. One with a crescent cutout and the other with more of a 'ramp'. Every little…
As I will change the default extruder and print head to a new one I needed a model of the current X Axis Plate of the printer. So I've tried to measure everything correctly. BUT it may be that there are still some mismatches between the…
This is the control box for my CR10s All In One project. The control box houses the BTT SKR Mini E3 v2 along with a Raspberry Pi. I converted my CR10s from 12v to 24v. I design this case and the power supply to not need any supports. You…
This is an extremely cheap filament guide I made to prevent filament from grinding on the runout sensor on the CR10S Pro V2. I've used mine for hundreds of printing hours, though. It's bent a bit, but still works. I intended to replace it…
After upgrading my CR10s Pro v1/v2's to the Microswiss all-metal hotend, I've struggled to find fan ducts that directed air flow properly. Most fan ducts that I've found have had four issues. 1 - They don't direct air low enough. 2 - The…
Spool holder for frictionless spool rolling. use with 608 Bearings Category: 3D Printer Parts
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well). Just use this adapter to connect stock X-carriage plate and the SB assembly. The…
The Led strip is supplied directly with the power supply of the printer. You need: LED Strip https://www.amazon.de/gp/product/B08JY5C6G7/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 Toggle switch…
onjour, Voici ma version de guide filament inférieur (entrée détecteur filament). En photos les étapes d'assemblage. Vous aurez besoin d'un galet à roulement comme celui-ci : (Type C avec roulement) https://a.aliexpress.com/_TwQWh…
Update:19\06\20 Uploaded Step File. Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link:…
Basically an adapter board to fit an SKR Mini E3 V3 in a CR10s Pro using the original mounting points. Had I not already pulled my CR10s Pro apart, I would have re-printed to better align the USB port, but ended up just drilling a hole…
After years of experimentation, calibration, trial-and-error, and countless hours of printing, I’m finally sharing what I consider the Best of the Best CR10SE profile . This profile has been carefully developed and extensively tested to…
Bonjour, Voici ma version personnalisé d'un guide filament supérieur pour CR10S PRO V1 et V2. J'ai pris pour base le guide filament de @Sharklade ==> https://www.thingiverse.com/thing:4100856 Lors de ma première version, j'ai dû chauffer…
This is a fan remix for the Creality Spider Hotend.
The small debris which my printer creates was getting out of hand. I normally dyson out my enclosure after a print to clean up the scraps, but thought a small bucket may be a simpler solution. I designed this to stick on the side of the…
This is a simple fan shroud to convert the Creality CR10Spro to a microswiss (clone) hotend. Designed to fit two 4010 radial fans for part cooling and a 40mm axial fan for hotend cooling. Print with the backside down with support under…
Remixed k1nb0te‘s cable chain carriage part with a filament tube support from Portzal's Hotend Cable Keeper. (works on Creality stock hotend) Also tightened carriage's mounting tolerance a little bit; cut a corner in order to avoid…
If you want to upgrade your CR10s Pro V2 with microswiss hotend but keep the bowden tube setup. You will found that the microswiss all metal hotend is too short compare the original hotend. And the BL touch (not deployed) will be longer…
Here's my version of a camera arm following the z-axis on a CR10S Pro (v2). The screws of the belt tensioner on the x-axis can be used with no replacement, by still having enough clearance for the nozzle to move it's full way. This is…
This is a filament guide for the Creality CR-10s Pro and Max printers. This print uses Skateboard Bearings, they should be the following (or equal specs): https://amzn.to/3a5lMvb These are constructed in a way so they do not need any…
I wanted to keep the printer apparence as stock as possible. The upgrades Silent fan upgrades: power supply fan replaced with Noctua 4020 12v fan motherboard cooling fan with 2 NoiseBlocker 4010 12v fans hot end cooling fan with Noctua…
This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S. There is a more recent version at the following link: https://www.thingiverse.com/thing:3259429 In this remix I have: 1.Sculpted the component…
J-HotEnd (OD 22.3 mm) mount for Creality printers such as Cr10/CR10S and most likely all other printers with common X carriage plate. Attached - all STL files and for a convenience same files in 3MF format. PLEASE READ design…
Print with notch facing up. and use M5 hardware.
This is based off of another design. Thanks to madmodder123. You need to make sure that this is 100% infill to keep it from breaking. I have had over 40 prints since putting these on and haven't had to relevel. Each piece should be…
Il s'agit uniquement du modèle 3D de la tête d'origine pour ceux qui souhaitent lui apporter des améliorations. Souhaitant justement adapter des ventilateurs plus silencieux, je n'ai pas trouvé de modèle 3D de bonne qualité, j'ai décidé…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:16_01_20 Uploaded…
Description I upgraded my heatbed to use a silicon heater pad, and wanted to be able to easily attach/detach the heatbed and add a thermal fuse. I've used Wego221 lever nuts to make life easier. This mod will also work for folks with the…
What you are seeing is my desire to make sure my dual z axis is leveled every time. I use a Lerdge controller with separate Z steppers, which made this much easier to maintain leveling between each side every time. Hardware includes: 4 x…
A modified version of the CR10 Stand Alone mod with support for the mks tinybee. I have not printed this yet so I cannot guarantee it works Category: 3D Printing
model in fusion 360 print PLA 300 speed no support
After switching to BMG extruder + e3d v6 direct drive, I couldn't get the nozzle low enough without running into the default z motor mounts. This low profile design allows for lower x carriage position and holds the motor more securely…
This is fan duct for creality printer CR10S Pro V2. I guess it will be working even for other printers which has similar hotend. It's used to replace the noisy creality fan with the noctua fan. Thanks to the fan duct the air from the fan…
This is a re-creation of the stock hotend fan shroud on the Creality CR10s PRO. I found the stock 40x10mm 24v hotend fan is pretty loud, but replacing this with a 12v Noctua 40x10mm fan may not provide enough airflow. I wanted to use a…
Octopus v1.1 mainboard adapter for usage with the CR10s Pro and custom PCB breakout board.
Bonjour, Voici un support pour caméra Yi Home. Vous pourrez surveiller vos impressions tout du long de se monter sur l'axe Z. Se fixe simplement sur l'axe de galet. Pensez à vous abonner à mon compte pour être au courant de mes nouveaux…
Title says all. Apart from these files you can print -> hotend front of your choice, i went with the bambu hotend mount by rincewind on printables. -> hotend back -> stealthburner main body. Enjoy your stealthburner. :)
I just cut two 45 degrees chamfer at the top and bottom of the original model so it can be printed easily face down with no support. This lcd is a great easy mod for your Cr10s pro so you can access all the missing settings. I included a…
Upgraded to an linear rail on my CR10-Max. Designed a new cover with deeper countersunk holes so the original bolts could be used again. The x axis limit switch sits a little further in and the cover is longer so it clears the linear…
Bonjour, Voici un support personnalisé pour la caméra Yi Home 1080p. Il permet la fixation de la caméra directement sur le plateau sans utilisé de quincaillerie supplémentaire. Fixation sur la vis d'origine du clip de maintient du…
A drag knife holder for the CR10S-Pro. I use the holes in the extruder case to mount the holder. The design uses threaded inserts. Instructions on how to use the software side can be found here:…
Here's my take on a bed handle for the CR10S. I wanted something that matched the angular look of the rest of my printer. I assume this should fit on the original CR10 as well, as for versions after CR10S, I don't know if it fits but the…
this is a remix from Devin Montes - Sturdy Simple Top Loading Spool Holder on myminifactory This spool holder is designed for CR-10 style printers that have a 2020 T-Slot Profile aluminum extrusion frame along the top. The holder is…
Part fan from remix. Added slightly bigger holes so my 3mm screws would fit. Also made it adjustable in height to get closer to the tip of the nozzle. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
Bonjour, Voici ma version réalisée à partir de la base fournie par @Black-raiser (merci à lui) de refroidissement de la carte mère. Ici pas besoin d'entretoise, et une taille réduite au strict nécessaire. Vous pouvez facilement y…
Brass brush for scrubbing between layers. Adjustable on 3-axes. Uses the brush from here: https://www.amazon.com/dp/B09
Modélisation du cover fan pour intégrer le KNOMI de Bigtreetech https://biqu.equipment/products/bigtreetech-knomi-v1-0 Je préconise de rajouter un point de colle chaude pour bien fixer le Knomi J'ai fais plusieurs tests d'impression , je…
Please note this is not compatible with the new CR10 V2 version This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S 1.This is primarily a cosmetic remix which includes larger and more fluent radii…
Ender 3 CR10S Multi Direct Drive Extruder with Tool Free Adjustment This thing is more about creating a flexible Direct Drive extruder assembly which allows for relatively easy swapping out of extruder head types and hot end maintenance…
This Model is perfect for the use of your CR10S inside a housing, if you havn't enough space for it. I designed it to screw it into the holes of the rubber feet, with the original screws. In the best case you use a cable extension, to be…
I love Stafferts design, but I had no use for the attachment point of the light, so I just removed it a while ago. Uploading in case anyone can use it. All credit goes to the original designer.
Third part of my Crusa mod to go with the MK3s extruder on the Cr10s Pro. Find my Mk3s adapter here: https://www.thingiverse.com/thing:4151703 I rearranged the breakout board for easier access, with a hinged door for protection. In the…
The bracket for the stock NEMA17 extruder motor is a perfect place for a drag chain mount to route back the extruder/hotend/x-stepper|limit switch cabling back to the control board. Bill of Materials 6x M3 threaded inserts 6x M3x6 button…
replacment of the stock y axis tensioner. PLA 0.2 layer 220/62 Temperature no support
Simple design of a light arm to turn an LED bar towards the printing plate. This design avoids the creation of shadows on the print from the hotend. It fits perfectly with the model I ordered on amazon , but can also be used with other…
Bonjour, Depuis mon passage en Direct Drive avec extrudeur style BMG je n'avais plus la possibilité d'utiliser mon capteur de fin de filament. Avec cet adaptateur le problème est résolu. L'imprimante garde donc sa fonctionnalité et reste…
A 2-in-1 upgrade for creality cr10s (and maybe others). Direct drive and auto leveling using nozzle. Uses "SIMAX3D Dual Drive BMG Bowden Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech…
I designed this to hold all of the original parts with the E3D Volcano. You will need a separate mount like the one below. I know we could 3D print one, but I wanted a metal mount and ordered…
A quick mount I made in tinkercad to mount the BTT Octopus in place of the original mainboard for the CR10s Pro
Bonjour, Voici ma tête d'impression direct-drive pour CR10S PRO V2. Montage hotend type V6 full métal en cuivre ! La description complète et les instructions d'achat hardware et de montage sont dans le PDF téléchargeable (instructions in…
=>MERCI DE BIEN LIRE LES MISES A JOUR SVP<= Bonjour, Je vous propose ici mon pack silence pour CR10S PRO V2 (n'ayant pas testé le montage sur la V1 je ne garantis pas la compatibilité au niveau du capteur de plateau). Toutes les…
Yet another CR10 remix for the CR10\CR10S Control Box. This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased…
This is a simple quick mount to have the breakout board mounted on the 2020 extrusion beneath the printer. I designed my own mount for my SKR 3 board that rotates the SKR3 board 90 degrees in comparison to the factory board. Unfortunately…
CR10S Pro Tool holder which holds all the tools and usb key and sd cards. Remix of a remix...
Reduction to PI TS35 display for ENDER 6/ CR10S
Easy to print, just slide the cable inside and then insert it in the rubber washer. Zip tie it and it's ready to go. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament:…
Creality CR10SE Display Stand, I needed to move the display, so made a separate stand that can be placed on the side of the machine. Print Settings Printer Brand: CR-10 SE Printer: Creality Rafts: Yes Supports: Yes Infill: 100% Category:…
I carried out a lot of upgrades cr10s pro v2, a screen was one of them. Klipper firmware on a raspberry pi for the CR10s V2 machine. simple bracket to fit to the original screen cutout holds both a raspberry pi 4b and screen together. you…
Upgrading the CR10 to a linear rail on the X Axis causes the existing carriage belt slots to be out of alignment as the Rail pushes the carriage further forwards. This bracket corrects the alignment problem and slips over the existing…
I wanted a simple quick easy adapter for the mosquito magnum hot end so it could fit perfectly on the cr10s pro. Came out amazing and has been printing like a champ. You have to change the retraction. I found 2mm was pretty good for the…
Here is a real quick stand for holding a Wyze Cam Camera. Installation is easy and flexible. The base just slips between the tabletop and the bottom of the CR10s PRO printer. You can position it anywhere that works for you, and it can be…
I found the idea of a USB plug protection appealing, but the designs were not easy to print or need sticky tape for fixing which, over time, might come off. So I decided to do my own design. This design features: Snap on assembly (no…
This is a Tab and back stop addition to the bed to make it easier removing and positioning the wham Bam magnetic bed. It must be printed out of high temperature material like ABS or PETG to survive the heated bed. You will need 6x16mm M3…
This is my adapter plate to use an Prusa Mk3s on my Cr10s Pro. I chose to adapt this extruder because I know there is a lot of great options around to upgrade it to almost anything you want including future evolution of its design…
Ender CR10S PRO V2 Bed levelling locks that assist in locking the bed levelling for the CR10, Printed form ABS due to the position in relation to the print bed (dont think PLA would of lasted with proximity to the heat pad or the thermal…
This is a 7.4 to 8.4 gage to set your inductive sensor heights when upgrading your CR10s Pro if you have a steel or flex plate bed. This gage have multiple steps with 0.1mm increments so it's obviously best to print it at 0.1 or less. I…
Description: This upgrade is designed to improve the overall performance of your 3D printer by addressing z-axis vibrations. Materials Needed: 2040 T or V-Slot Extrusion: You’ll require four pieces of 2040 T or V-slot extrusion: 2x 650mm…
Cr10s pro v2 conversion to Skr Mini E3v3 board. BOM 5 x M3 heat inserts 4.5/5mm width
IMPORTANT UPDATE\NOTICE: Having spent a lot of time, effort and probably twice the price of a Nimble I still cannot get this to work effectively due to the flexing of the core considerably negating the applied retraction. I am therefore…
Update 2020/05/05 There was a small bug on the original Gen4 ABL mount, that the gantry won't hit the X limits switch. A revised version is updated to fix this issue: Gen4_Stock_ABL_mount_for_dual_5015_Duct_M12_fixed.STL If you have…
use any print settings then mount to 2040 extrusion with t slots
I bought 2x 500mm linear guides MGN12H. And made a model of Y axis with profile 2020 and Y base plate and spacers wich are important for upgrade. You can use 500mm or cut them same length of 2020 profile. I made parts from aluminium but…
This is an adapter to fit the Ender light bar onto the CR10-10s the install of the light is very simple. material used: PLA+ Light Link: https://a.co/d/iCCKj7t
This model was remixed to accommodate an Eddy Duo inductive sensor as part of a broader retrofit of the CR-10S to a Manta M5P control board. The components shown were printed in PLA+ for prototyping, though the final version of the main…
Properly over-engineered CR10S Pro motherboard cooling fan mount. You will need some additional M4 hardware: 2x M3x10 bolts 4x M3 washers 4x M3x30 bolts Washers are supposed to fit underneath the bolts used to screw the part to the…
This is a new model, I have all the designs for it in Tinkercad and have released it for free for anybody requiring a removable side bin for a Creality CR10 se printer. The bracket needs to be printer with supports currently, I will look…
I used threded inserts for the part that holds the extruder. Print with supports on the parts back as showed in picture 3. The first 2 pictures are from a different version. But this version fits better. I have not had any problems with…
SUPLEMENTO SOPORTE DETECTOR FILAMENTO CR10S PRO BONDTECH Category: 3D Printer Extruders
Tool holder for the CR10s or any printer with 20x20 rails with 6mm slots. Gives you the place to leave your tools at your printer. Allen keys: 5mm, 4mm, 3mm, 2mm, 1.5mm Flathead screwdriver and the three spanners Category: 3D Printer…
This model allows you to remove the screen on the CR10S Pro and Pro V2 and blank off the hole. On the back it has mounting bosses for a Raspberry Pi Zero. The FreeCAD file used to create it is included. To change the mounting holes, edit…
..first thks to ToddsWorld for the great design... I was using his design for all my stock CR-10s Pro, but when I started to add z-syn or even frame bracing, I needed to alter the design and finally decided to do a complete makeover.…
