Cr10s Pro 8mm inductive sensor height gauge for wham Bam plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 7.4 to 8.4 gage to set your inductive sensor heights when upgrading your CR10s Pro if you have a steel or…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a 7.4 to 8.4 gage to set your inductive sensor heights when upgrading your CR10s Pro if you have a steel or flex plate bed. This gage have multiple steps with 0.1mm increments so it's obviously best to print it at 0.1 or less.
I followed this tutorial: https://youtu.be/VH3zrRNOGfA and quickly found out that my sensor was triggering at its nominal value of 8mm because I have a wham Bahm flex plate installed.
I found that my sensor is working well set at 7.8mm, that gives me a Z offset of -0.04mm and it is now very stable and gives me perfect first layers everytimes.
This is the sensor I'm using: http://tinyurl.com/y5zeo8nl
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
20%
Category: 3D Printer Accessories