CR10s Pro tabs and stop for Wham Bam magnetic plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Tab and back stop addition to the bed to make it easier removing and positioning the wham Bam magnetic bed.…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a Tab and back stop addition to the bed to make it easier removing and positioning the wham Bam magnetic bed.
It must be printed out of high temperature material like ABS or PETG to survive the heated bed.
You will need 6x16mm M3 flat head screws to replace the original ones, some washers and an additional 6xM3 lock nuts.
First, lock the new screws to the bed like on the photos, nice and tight and then mount the plastic parts with another lock nut and washer.
One precision, I mounted my Wham Bam system directly to the heated bed and discarded the aluminum plate.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: Coex3d ABS Or PETG Red
Notes:
I used Cubic infill to keep it rigid and an 8mm brim to make sure it sticks.
Category: 3D Printer Accessories