E3D Hemera Ender 3/CR10/CR10s Printed Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed printed parts to better suit my upgraded CR10s, specifically to fit a BL Touch and the older style X Carriage
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When upgrading my CR10s, I realized E3D didn't provide parts that would support my specific printer. If you have also added a BL Touch, you might end up in the same situation when upgrading to a Hemera. The printed part for the older carriage is very bulky, and doesn't support a BL Touch with the parts provided in the guide (linked here).
Instead of using the big backing plate, I chose to remix the V2 adapters to support my older carriage, and adapt the BL Touch to support M3 nuts/bolts. This was very simple, since it only required 1 through hole to be moved a few mm on Part A, and the nut holes to be widened on Part B.
If you have the newer backing plate, the BL Touch piece is compatible with the original printed parts so feel free to use the Part B for the BL Touch m2.5 to m3 conversion alone.
9/3/24 Update: Cleaned up the .stl converted files (merged planar surfaces etc), added .step files, updated cover photo
Links to the original files:
Older ender 3 and CR10 Guide