FormD T1 Exhaust Shroud V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust shroud for optimizing air flow in the FormD T1 v2.1 case
- Ocena
- 4,8 / 5
- Polubienia
- 151
- Pobrania
- 3512
- Wydruki
- 5
- Wyświetlenia
- 21 222
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you intend to sell prints of this model, then please purchase a Commercial Use license version here.
Main Features:
- Improves thermals
- Reduces fan turbulence by using circular cutouts for the fans
- Easier fan mounting or swapping using M3 screws
- Zip tie slots for additional cable management
Required hardware:
10 × Heat Set Inserts: Size M3×4×5 (Voron spec, 5mm OD)
2 × M3×8 countersunk screws
8 × M3x35 (for 30mm thick fans) or M3x30 (for 25mm thick fans)
If you never worked with heat set inserts before, watch this.
V2 Changes:
- new scoop design for improved print quality
- new max motherboard/ram clearance option
- enlarged GPU side scoops
- improved riser clearance
- fixed split symmetry and fit
- removed structural ribs
- other minor fixes and improvements
Print recommendations:
Print in PETG or ABS/ASA.
If printing in ABS/ASA it's recommended to scale the model up by .5% to compensate for material shrinking.
Confirmed motherboard compatibility:
- ASUS B650E-I
- ASUS X670E-I
- ASUS X870I
- Asrock B650I
Confirmed CPU cooler compatibility:
- Thermalright AXP90-x47 FC
- Thermalright AXP90-x53 FC
Featured in:
The Ultimate FormD T1 5090 Build