FormD T1 Exhaust Shroud V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exhaust shroud for optimizing air flow in the FormD T1 v2.1 case
- Rating
- 4.8 / 5
- Likes
- 150
- Downloads
- 3,496
- Makes
- 5
- Views
- 21,151
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
If you intend to sell prints of this model, then please purchase a Commercial Use license version here.
Main Features:
- Improves thermals
- Reduces fan turbulence by using circular cutouts for the fans
- Easier fan mounting or swapping using M3 screws
- Zip tie slots for additional cable management
Required hardware:
10 × Heat Set Inserts: Size M3×4×5 (Voron spec, 5mm OD)
2 × M3×8 countersunk screws
8 × M3x35 (for 30mm thick fans) or M3x30 (for 25mm thick fans)
If you never worked with heat set inserts before, watch this.
V2 Changes:
- new scoop design for improved print quality
- new max motherboard/ram clearance option
- enlarged GPU side scoops
- improved riser clearance
- fixed split symmetry and fit
- removed structural ribs
- other minor fixes and improvements
Print recommendations:
Print in PETG or ABS/ASA.
If printing in ABS/ASA it's recommended to scale the model up by .5% to compensate for material shrinking.
Confirmed motherboard compatibility:
- ASUS B650E-I
- ASUS X670E-I
- ASUS X870I
- Asrock B650I
Confirmed CPU cooler compatibility:
- Thermalright AXP90-x47 FC
- Thermalright AXP90-x53 FC
Featured in:
The Ultimate FormD T1 5090 Build