1 / 7
5.9 Inch Air Conditioner Exhaust Hose Wall Adapter — zdjęcie 1
1 / 7

5.9 Inch Air Conditioner Exhaust Hose Wall Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was…

Ocena
5 / 5
Polubienia
45
Pobrania
546
Wydruki
1
Wyświetlenia
3911
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit.

The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The screw holes are placed at a sufficient distance to prevent the drywall from cracking when inserting a dry wall anchor and screwing the collar on.

The base accepts a 6 inch diameter metal duct pipe. The duct pipe can protrude out of the wall up to 2 5/8 inches with the collar fitting over it. This makes cutting and maneuvering the duct pipe easier. It also ensures that the exhaust air flows through the duct pipe instead of around it.

The top of the collar accepts a 5.9 inch diameter exhaust hose for an air conditioning unit. The exhaust hose is attached by screwing it in with a counter-clockwise rotation.

The base of the collar just about maxes out the print bed area of an Ender 3/Pro, so smaller printers might not be able to print this out.

The actual duct pipe I modeled this for is the "Dundas Jafine BLH6WZW Louvered Vent Hood, 6", White".

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.28

Infill:

20

Filament: eSUN PLA Black

Category: Household

Tagi