1 / 2
Voron 2.4 Umbilical Exhaust Grill for PUG — zdjęcie 1
1 / 2

Voron 2.4 Umbilical Exhaust Grill for PUG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mod of the Voron exhaust grill to add PUG compatibility for an umbilical

Ocena
5 / 5
Polubienia
91
Pobrania
604
Wydruki
7
Wyświetlenia
4384
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Description:

Use the excellent Parametric Umbilical Gland (PUG), instead of a PG7 or similar, to secure your Voron umbilical through the exhaust grill. It also provides a location for the reverse bowden tube. You can use the Parametric Umbilical Clip (PUC) to hold the umbilical and tube together.

Parts:

  • 2x M3x5x4 (Voron standard) heat set inserts

  • 2x M3x18 or 20 socket head screws

Print Settings: 

ABS/ASA/PETG, 0.4 mm nozzle, 3 wall lines, no support, 0.2 mm layers. 

Assembly Notes: 

Heat set inserts are pressed in from the back. 

The PUG Clamps can attach a PUG to just about anything flat with room for two M3 screws 24 mm apart. It holds PUG in place by going around the outside of the linking features, and for extra security those features are slightly off-center so it clamps when tightened. 

It's easiest to put one screw most of the way in on one side of the PUG Clamps as seen below, pass the cable through, then add the PUG. 

Once everything is in position, add the other screw (you may need to squeeze together a bit). Screwing them both tight will clamp the PUG in place.

My umbilical pass-through is just a small notch cut into the stock exhaust; it lines up well and saved a reprint. 

Updates:

  • 2024-02-21 - Updated PUG Exhaust Grill to shift the PUG adapter to the right, freeing up the reverse bowden path and making it not captive anymore. Reduces filament friction considerably. Added STEP file of the assembly.

Tagi