Diamond painting case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Storage case for Diamond painting diamonds
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 496
- Wydruki
- 7
- Wyświetlenia
- 2909
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this simple box for my wife for her diamond painting diamonds, since they come in little plastic bags and you can't really store them properly in between your painting sessions.
The model has a slightly smaller radius in one corner so you can't put on the lid in the wrong orientation.
The lid fit is more on the tighter side on purpose so it will not fall off when turning upside down or dropping it (lid is 0,1 mm wider in x and y than the base, so there's a 0,05mm gap all around, so the layer lines prevent it from just falling off).
Printed solid in PLA
0,2mm layer height