MT VICE - ROTATE & TILT MODEL PAINTING VICE

                                        MT VICE - ROTATE & TILT VICE WORKTABLE

NOTE UPDATE 12 FEB 2025 : REWORKED BOLT AND SIDE CLAMP SO THERE IS NO LONGER ANY HORIZONTAL MOVEMENT. ( just need to download and print MT VICE 5 - Side Clamp and MT VICE 2 - Main Bolt)

                                                                    150mm Square Rotating Vice.

              Good Grip, Smooth operation and a Single winding arm with lockable rotation.

                                       Designed to hold models in place when painting.

Requires two M5 x 10-15mm Screws, although I have included a printable one which will do the job , if careful when tightening. 

Assembly instructions included if needed.

SUPPORTS only needed for the MAIN BOLT and The ROTATION LOCK BOLT, also use extra infill & walls for strength.

Use extra infill on the table top for strength around the screw holes, i used 25% gyroid and a couple of extra walls.

TILT BASE - Lockable Rotation and Tilt. (3 parts)

There are a few extras already done below  :-

OPTIONAL EXTRAS & ACCESSORIES

10mm High Clamps for smaller models, for reference the normal clamps are 17mm high.

PAINTING TRAY

A paint tray for upto four colours and a brush rest that attaches to the table through the accessory holes.

STANDARD LOW BASE - ROTATES ONLY

WEIGHTED BASE 

A base you can fill with used screws or something else heavy if your going to use the tilt function with heavier items.