MT VICE - ROTATE & TILT MODEL PAINTING VICE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MT ROTATING and TILTING MODELING VICE
- Rating
- 5 / 5
- Likes
- 273
- Downloads
- 831
- Makes
- 8
- Views
- 4,499
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
MT VICE - ROTATE & TILT VICE WORKTABLE
NOTE UPDATE 12 FEB 2025 : REWORKED BOLT AND SIDE CLAMP SO THERE IS NO LONGER ANY HORIZONTAL MOVEMENT. ( just need to download and print MT VICE 5 - Side Clamp and MT VICE 2 - Main Bolt)
150mm Square Rotating Vice.
Good Grip, Smooth operation and a Single winding arm with lockable rotation.
Designed to hold models in place when painting.
Requires two M5 x 10-15mm Screws, although I have included a printable one which will do the job , if careful when tightening.
Assembly instructions included if needed.
SUPPORTS only needed for the MAIN BOLT and The ROTATION LOCK BOLT, also use extra infill & walls for strength.
Use extra infill on the table top for strength around the screw holes, i used 25% gyroid and a couple of extra walls.
TILT BASE - Lockable Rotation and Tilt. (3 parts)
There are a few extras already done below :-
OPTIONAL EXTRAS & ACCESSORIES
10mm High Clamps for smaller models, for reference the normal clamps are 17mm high.
PAINTING TRAY
A paint tray for upto four colours and a brush rest that attaches to the table through the accessory holes.
STANDARD LOW BASE - ROTATES ONLY
WEIGHTED BASE
A base you can fill with used screws or something else heavy if your going to use the tilt function with heavier items.
