Prusa MINI Enclosure - External Display Housing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.29 – €6.47 net (excluding VAT)
For file: MINI_ExternalDisplay_0.4n_0.15mm_PETG_MINI_6h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.88 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 6.72 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An external display housing for the Official Prusa MINI Enclosure (for door hinge on left side only)
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 230
- Makes
- 12
- Views
- 1,810
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side.
Required hardware:
-3x M3x8 screws
-1x M3 nut
-Reuse the 4x M3 screws from the original LCD box
-14-Pin (2x7) 2.54mm IDC ribbon cable extension or a longer cable to replace the original (I used this 12-inch extension and it's perfect: https://www.ebay.com/itm/292138605170?var=591088276885)