Meshtastic Solar Housing for Pole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for solar powered meshtastic radio node mounted on a pole.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 81
- Makes
- 0
- Views
- 1,182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Housing for mounting solar powered radio on pole.
Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof.
The prints are optimized to not require print supports but the enclosure is split in two parts and require gluing.
Screw in M3 from the sides using the holes to secure the insert.
Note: The insert slot is compatible with https://www.printables.com/model/756630-meshtastic-housing-for-pole so if you want to use a SMA antenna or Heltec v3 board you can use those inserts in this enclosure.
Bill of Material
WisBlock Meshtastic Starter Kit